Jump to content
SAU Community

Vic Autosalon, R32 Wit Kustom Front Facin Intake Mani


Recommended Posts

hey guys,

I was at Autosalon, and i spotted this, pretty sure its a SAU car or 'wang racing' that someone on SAU would know.

I was just wondering if this is a cut and shut and a rebore of the stock item or is an aftermarket item?

The reason I ask is that it might be a way to save some cash if it is just a cut and shut :whistling:

ps. sorry about the crappy phone pics

post-24514-1194690468_thumb.jpg

post-24514-1194690544_thumb.jpg

URAS unfortunately I cant dispute your generalised claim as I never just added the intake alone with before and after dyno results.

I did a heap of mods inc new turbo at the same time. The main reason was for unique looks and to match the R33 GTR FMIC.

If you look closely on the firewall behind it you will see my solution to the Coolant Air Bleed that needs to retained somehow when you fit another type of manifold.

The cost was about $1500 all up and all the build info is here Visit My Website

Nissan_Skyline_R32_89.jpg

Nissan_Skyline_R32_90.jpg

post-12111-1194851514_thumb.jpg

I think what URAS was getting at was that changing the entry position of a factory design inlet manifold can have detrimental effects on the distribution of air flow to each cylinder. It may not even be evident on the dyno but you might find that, should you have lambda sensors on each cylinder, the air fuel ratios will vary between cylinders. It makes it harder to tune as you only have an average A/F ratio coming out the exhaust when infact one cylinder may be at 13:1 and one at 11:1.

Does look good though :)

Yeah Dave I know where your coming from.

It may be interesting to put the manifold on our RB20 Drag Ute which has pyros on all cylinders running a Autronic to see if in fact it is no good.

Maybe we should put lambda sensors as well...

I did have a try at extending the port throats for torque but did not bellmouth them and left a fair bit of volume as well.

Also I paid attention to velocity going in after the TB to try to even it out a bit.

BUT, it was for LOOKS! :)

5 mins on a flow bench will show you what i mean, hardly worth swapping accross to another car, but hey if it was for looks it definately works well :wave:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...