Jump to content
SAU Community

Recommended Posts

Hey Fellas,

I am thinking of getting a carbon-fibre bonnet for my R33 Skyline. An unfortunate thing happened over the weekend; some bastard decided to key my bonnet and leave initials everywhere. So instead of fixing it which will probably cost a small fortune, I've decided to go carbon-fibre. However, I have never bought anything carbon-fibre so was wondering if you can help with the following questions:

1. Is it legal to have a CF hood as some say it is, some say it's not?

2. Where is the best place to purchase from / who can install them?

3. Would it fit on perfectly with minor modifications?

4. Any pictures of one on a black R33 Skyline?

I was thinking of getting perhaps one of the following... your thoughts on which one looks best?

* http://www.carmate.com/product_details.php...N&p_id=9421

* http://www.carmate.com/product_details.php...N&p_id=9441

Many thanks,

SM

Link to comment
https://www.sau.com.au/forums/topic/193112-carbon-fibre-bonnets/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

1) Yes legal if you have an ADR aprroved one. I had one for 3 years and never had any problems(not ADR aproved tho)

2) Who ever sells them empire/SRB on this forum has them. They sould be straight fit take off your bonnet and fit it (i have a GTR)

3)see above

4) pic on a black 32 LOL

http://img179.imageshack.us/my.php?image=pict0067if5.jpg

1) Yes legal if you have an ADR aprroved one. I had one for 3 years and never had any problems(not ADR aproved tho)

2) Who ever sells them empire/SRB on this forum has them. They sould be straight fit take off your bonnet and fit it (i have a GTR)

3)see above

4) pic on a black 32 LOL

http://img179.imageshack.us/my.php?image=pict0067if5.jpg

Thanks mate... very nice...

What kinda of price should I expect to pay...also, there's two type... the carbon looking one with the lines and one without that looks smooth plastic, which is better?

I dun think the legality of it is that of a big problem

Just get some of those pins to hold it down.

You shoud also check the quality of the product

as most of them only has a thin CF outer layer and the inside is fibreglass

its okay as long as you don't have the ones with the vents etc that protrude from the top of the bonnet... anything that may impede a pedestrian from being able to 'roll' over the bonnet in the case of an accident is unroadworthy...

and yes I know WRXs have bonnet scoops but they have obviously been through much testing and approval

plus I think the vents make it look like ass

I dun think the legality of it is that of a big problem

Just get some of those pins to hold it down.

You shoud also check the quality of the product

as most of them only has a thin CF outer layer and the inside is fibreglass

Bonnet pins are illegal...

apparently people can get caught on them when your mowing them down in your car...

LockBonnetpins.jpg

DSC00974.jpg

i rekon the flush mounted pins would give you less hassle from the po po. btw spunky dont buy from carmate. havn't heard good stuff bout their quality.

oh and almost all "cf" bonnets you are gonna find will be fiberglass with a CF skin. true CF bonnets start at around the $1000 mark. more if you are getting a genuine jap one. custom carbon also make very high quality stuff from what i hear

Thought custom carbon wasnt around anymore.

And yeah I dont think the popo can get you if you use the flush pins.

By the way, you guys saying carbon bonnets are ok as long as theres no vents, are you certain? As far as I know there are no ADR approved carbon bonnets, leading me to think that all carbon bonnets are illegal because they don't crumple in a collision.

i have no idea about custom carbon. just a name that i heard was good for all your carbon needs. meh if they're closed then ignore the above. i rekon you're right about the crumple thing though. these bonnets shatter which is deemed dangerous. check the vic roads website. i may be wrong

LockBonnetpins.jpg

DSC00974.jpg

i rekon the flush mounted pins would give you less hassle from the po po. btw spunky dont buy from carmate. havn't heard good stuff bout their quality.

oh and almost all "cf" bonnets you are gonna find will be fiberglass with a CF skin. true CF bonnets start at around the $1000 mark. more if you are getting a genuine jap one. custom carbon also make very high quality stuff from what i hear

Very nice this is the sort of thing I wanna get... but besides Carmate... I have no other place I know of to get some carbon stuff... I wish there was some place in Melbourne I can drive in and hand pick what I want... nothing like eye-balling what you wanna get.

Promax Auto

1, Mary St.,

Blackburn

04 33260991 (Alan)

Give him a go, if im not wrong he has some samples on hand, and will be able to order some in from within the country for you too.

You're a life-saver... so you have dealt with him before? Your experiences?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...