Jump to content
SAU Community

Recommended Posts

I have seen a car in japan that had R34 attesa and ABS fitted (along with a 34 engine and 6 speed too).

if I was going to do it I would skip the 33 and go straight for 34 if at all possible.

I heard ages ago that you could just swap the controllers, did a 1 minute google and came up with;

http://www.gtr.co.uk/forum/upload/6095-r32...controller.html

which refers to this

http://www.carsurvey.org/review_19225.html

Which says "Unless you know what you're doing you'll be better off with an R33 or R34, but for the ultimate in more than one sense of the word, an early R32 is hard to beat.

Handling can be subdued considerably by swapping in the ATTESSA-ETS AWD controller unit from R34, which pretty much makes the car behave like its newer counterparts."

  • 5 years later...

I just ended up getting the cheapo ebay attessa tweaker, and it worked so well i just left it at that. The plugs are different on the attessa units, so its more than just a simple brain swap. No idea how much more.

They work well yes, but you're only ever going to get the system to operate as fast as it's weakest link.

I think it could be worthwhile, I am sure someone has done it.

Just need to do some dredging.

It's funny for how widespread the internet is there is still alot that only exists in the real world and I'm ok with that I think.

They work well yes, but you're only ever going to get the system to operate as fast as it's weakest link.

I think it could be worthwhile, I am sure someone has done it.

For me, i'd want to have some evidence it will make a non-trivial improvement over a tweaked standard system for the effort to be worth it.

But you may just want to satisfy your curiosity and try it!

Driving an R33 GT-R and 33 Back to back clearly shows the worthiness of the AWD upgrade I think.

ETS-PRO while good like the Ruzic unit is still not going to the root issue which is the preload, the speed at which the system operates and of course the vast increase in sample rate.

Driving an R33 GT-R and 33 Back to back clearly shows the worthiness of the AWD upgrade I think.

ETS-PRO while good like the Ruzic unit is still not going to the root issue which is the preload, the speed at which the system operates and of course the vast increase in sample rate.

ETS-Pro maintains preload, the R32 and R33 system are same operating speed (pump gaining and losing pressure) and it has a brand new ECU with much faster sample rates?

Driving an R33 GT-R and 33 Back to back clearly shows the worthiness of the AWD upgrade I think.

I guess you meant R32 and R33 GTRs? If so, thats pretty obvious and therefore not so interesting.

IMO what is more interesting would be comparing an R32GTR+attessa tweaker to an R33GTR without a tweaker.

I'm assuming that the change in front/rear bias as the system evolved is a much more significant affect than things like the ECUs sample/clock rates. It is an assumption tho. Would be interesting to KNOW. Bang for buck and ease of installation the tweaker will be miles ahead.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...