Jump to content
SAU Community

Recommended Posts

I been looking around and cant make up my mind on what oil cooler to get for my RB30DET..

I dont care about the looks, i dont need fancy fittings, but i dont want it to break or leak EVER.

I dont know if i should go one of the just jap $400 kits or grab one of the cheapie ones available.... anyone had any experience with both ?

How many rows is good enough ? I wont be doing much track racing to start with but i will be going for a quarter mile down at WSID in the next month or so...

Car has 363rwkw and im still using the stock oil cooler that rb25's have.

any suggestions welcome

Link to comment
https://www.sau.com.au/forums/topic/193732-which-oil-cooler-setup-to-buy/
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i would also like to know the difference between the branded oil cooler kits and the cheapie ones????

I have installed a Trust 13 core oil cooler and relocator on my 32 GTR.

It came with all the hardware needed to install, earls fittings, air deflector and a thermostat on the oil filter relocator ( I have not seen any thermostat on the cheapy ones), no extra hardware need.

The difference in the oil temps are great, went to DECA and TEXI and the temp did not go over 90 degrees.

Hope this helps

I have installed a Trust 13 core oil cooler and relocator on my 32 GTR.

It came with all the hardware needed to install, earls fittings, air deflector and a thermostat on the oil filter relocator ( I have not seen any thermostat on the cheapy ones), no extra hardware need.

The difference in the oil temps are great, went to DECA and TEXI and the temp did not go over 90 degrees.

Hope this helps

Thankyou for the input. It helps alot.

Yeh i was just looking at some of the products available and it looks like most of the cheapie ones come with just the basic setup wheres brands like Trust have created complete kits that include pretty much everything needed. How much did you pay?

Thankyou for the input. It helps alot.

Yeh i was just looking at some of the products available and it looks like most of the cheapie ones come with just the basic setup wheres brands like Trust have created complete kits that include pretty much everything needed. How much did you pay?

I payed $860 delivered from Nengun at Feburary 07, the AUD is great to purchase from Japan. Just checked Nengun site and they cost around $600 plus freight.

I payed $860 delivered from Nengun at Feburary 07, the AUD is great to purchase from Japan. Just checked Nengun site and they cost around $600 plus freight.

cheers mate :) will check it out now.

I would go the earls blocks around 120 for both i think maby bit more

then hit up http://cgi.ebay.com.au/Engine-oil-cooler_W...1QQcmdZViewItem

that is identical to the B and M coolers for around 130, but hey use a SAE thread not NPT but no biggie.

Then use some fittings and rubber lines. Earls thermostat if you heart so desires.

I would go the earls blocks around 120 for both i think maby bit more

then hit up http://cgi.ebay.com.au/Engine-oil-cooler_W...1QQcmdZViewItem

that is identical to the B and M coolers for around 130, but hey use a SAE thread not NPT but no biggie.

Then use some fittings and rubber lines. Earls thermostat if you heart so desires.

sounds like a good idea! :) will compare prices of the two. that way seems loads cheaper.

thanks man.

Sounds like you're serious about protecting your investment.

None of the cheap kits around fitted my idea of rock solid, and the Jap ones are way over priced, carrying an insane amount of mark up.

I liked the look of a certain chunky CNC cut take off and adapter that I saw on full house drag cars, PAC cars, etc etc years ago. Took ages to find them, they're the same bits sold here

I grabbed the block take off and filter head from ARE plus a Earls -10 AN fitting for a pressure sender. I then picked the oil cooler of choice, few $100 bux of aircraft fittings later and some hose and hey presto! It's the most hardcore, solid solution I could think of.

I later found out, that Earls actually make the billet bits, so you can import em from the US for almost nothing with the way the Ozzi dollar is now :)

No way would I use a cheap $400 kit with the above available, I don't give a shite that people have been running em for years with no issues. Def a case of pay now, save later.

Edited by GeeTR
Sounds like you're serious about protecting your investment.

None of the cheap kits around fitted my idea of rock solid, and the Jap ones are way over priced, carrying an insane amount of mark up.

I liked the look of a certain chunky CNC cut take off and adapter that I saw on full house drag cars, PAC cars, etc etc years ago. Took ages to find them, they're the same bits sold here

I grabbed the block take off and filter head from ARE plus a Earls -10 AN fitting for a pressure sender. I then picked the oil cooler of choice, few $100 bux of aircraft fittings later and some hose and hey presto! It's the most hardcore, solid solution I could think of.

I later found out, that Earls actually make the billet bits, so you can import em from the US for almost nothing with the way the Ozzi dollar is now :)

No way would I use a cheap $400 kit with the above available, I don't give a shite that people have been running em for years with no issues. Def a case of pay now, save later.

spot on mate

exactly what I'm chasing - or have in mind.

hope i can gather the same stuff you had collected for yours.

other than that. sounds like I am going down that road. too right. "pay now save later"

Hey GeeTR,

what is the part in that pic with TDS01 on it?

I want an oil cooler but without the relocation. Where can i get a quality block that goes under the stock oil filter and lets me attach 2 lines, a cooler and some sort of fitting for oil pressure.

thanks fellas

Hey GeeTR,

what is the part in that pic with TDS01 on it?

I want an oil cooler but without the relocation. Where can i get a quality block that goes under the stock oil filter and lets me attach 2 lines, a cooler and some sort of fitting for oil pressure.

thanks fellas

VPW

Holley

SummitRacing

That part is Earls thermostat or "oil stat" - again available from the above links. Look around, you might find that you can order it cheaper from US rather then locally.

Look around, I considered the Pommy gear Aeroquip

Edited by GeeTR

the best i have seen and used is trust. good strong cores, well made, well designed kits, and price is not too bad. worth every penny. I have one on my 32 GTR.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...