Jump to content
SAU Community

Recommended Posts

i dont suppose any 1 on here can do a lil stereo install for me? any of you guys done 1 before?

just want a new head unit put in, i dont have any subs or amps or anything like that.

would prefer to know that some apprentence has not taken my car for a spin while at a shop and its been done the right way not some half assed dodgy wiring job

there can be a bevarage exchange or some $$ might help with your xmas shopping

Link to comment
https://www.sau.com.au/forums/topic/193743-anyone-done-car-stereo-installs/
Share on other sites

2 viable options

but on the 1 hand "you cant make friends with salad" "you cant make friends with salad" and they could be drift spec stereo installs? :excl:

on the other hand a name like sinistagts sounds like he could be part of the japanese mafia :excl: i think im getting the headlight switch prob i was reading in the maintenance section (half the time i only have 1 headlight even after changing the globe) so maybe i can con him into fixing that for me as well :worship:

im a north subs boy but im fine with having an excuse to take the GTR for a spin, i still havnt picked up the stereo yet and its ment to be xmas pressie so im trying to work it closer to the day without it being a pain in the ass.

what's the going rate these days

just sneaking this in at work though so hopefully thats good english :excl:

Edited by gzilla

I have a prewired conversion loom to plug your stereo straight into your standard stereo loom, assuming all Skylines are the same (I made it for my R34). $50 if you want it. Plug and play.

sinistagst (dan) is an electronics engineer by trade, pretty sure he'd do stereo installs. He wired up up my boost gauge to my lights, i recommend him.

i thought he was only into engine's, when i met him he left me realising i dont know sh*t bout turbo's.

I have a prewired conversion loom to plug your stereo straight into your standard stereo loom, assuming all Skylines are the same (I made it for my R34). $50 if you want it. Plug and play.

i dont know what that is :O but isnt $50 roundabout the mark to get the stereo installed at a shop anyway

i can install wiper blades.

if youre interested give me a pm.

wiper blades? :worship: there was some sarcasm behind that yeah

anyways cheers for all the offer's guys wasnt expecting that much of a response, its just a simple install though. i think engineers course is a bit of overkill :O good ta know we got some tech heads in the club though

do stereo's normally go cheaper closer to xmas or just after?

http://clarion.com/au/en/products/2007/aud...1866286059.html

thats the lil baby im looking at, seems to look the closest to the 32's interior style with the slightly old school look. seen it for $300 at autobahn

i was ment to look at everyone's stereos at small car sunday to see what go's well with the interior but i forgot, hopefully ill make it out on the cruize tonight n see what ya all got though

dan, go to ang's audio tell him me and loz sent you. i got all my shit and the alarm installed for less then what the alarm costs by itself plus its pretty close to you.

Yeah I got my alarm fitted at Ang's Audio, top bloke and very reasonable pricing!

i installed my sterio in my car with the help of one of the boys at autobarn (dont work there anymore i quit) and it wasnt that hard really the dash is easy when you pull all the right bits off in the right order and i checked the price for you $300.00 can be done but normaly would be close to 399.00 but in saying that xmas things are cheaper and all autobarn stores have a huge sale on boxing day like everything is sold at almost cost price and get in early cause every man and his dog goes there it's crazy, so hold off untill boxing day if you can

lol $50 for a stereo install - good luck with that! The male part of the loom (if you do an install properly) to plug into the factory loom is $30 at cost. Plus tons of soldering and mucking around. Hence why me selling the conversion loom is crazy value at $50.

Shouldnt cost more than $150 max! Dan (sinista) has done some electrical work on my GTR and have been happy with the result but as Dan said he is a little flat out atm moving to QLD and playing with his new girls car. :ermm:

Ryan

Shouldnt cost more than $150 max! Dan (sinista) has done some electrical work on my GTR and have been happy with the result but as Dan said he is a little flat out atm moving to QLD and playing with his new girls car. :)

Ryan

He's still only thinking about it.......... gets it this week tho!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • Tow a boat... people won't know wtf is going on 🤣 
    • I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...