Jump to content
SAU Community

Recommended Posts

As a lot of you know, some of us ACT SAU'ers are BIG supporters of Federal tyres and I am always looking for someone to help promote the product...

Federal Tyres are a seriously under rated product that deserve a lot more exposure ---- Thats why I am STOKED to say that the father of drift and owner of Option magazine - Daijiro Inada has built his new project car and Federal 595 RS is his tyre of choice!

These photo's were taken recently at the 2007 SEMA show in Las Vegas and are out of a recent american tuning magazine, the video was at Tokyo Autosalon 2007.

For those who dont know who Daijiro Inada is... Google him and you will see, he is famous for bringing drift to the world scene along with the drift king Keichi Tsuchiya...

Daijiro also built the original Stream Z which you will know from Gran Turismo 4 - a high speed 350Z capable of over 400kmh...

ONLY THE BEST CHOOSE FEDERAL TYRES!!

post-17958-1195193682_thumb.jpg

post-17958-1195193771_thumb.jpg

post-17958-1195193820_thumb.jpg

post-17958-1195193829_thumb.jpg

Edited by Bullet32
Link to comment
https://www.sau.com.au/forums/topic/193989-only-the-best-use-federal/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Old War Torn has had a real relationship with that 350z, maybe hes found a tyre that wont delaminate?

- Delaminated the rears, spun car at 300 while down shifting in 2003

- Forgot to redline the car in 5th to 6th gearchange loosing time in 2004

- With a new WRX rear end to prevent cambering when the car squated in 2005, forgot instructions and ran off the end of a track in qualifying putting JUN boss Koyama-san in a kneck brace.

JUN and Top Secret built the car, not Daijiro if im not mistaken. He just keeps crashing it :ph34r:

  • 2 weeks later...

Just another update on Federal Tyres...

The official launch of the new Federal 595RS - R was held in Taiwan recently... (See link)

http://www.driftworks.com/articles/Driftin...-Taiwan,32.html

This new development will be available in Australia soon (probably next year) and is a re-inforced, slightly softer version of the existing 595RS, which means that it will be better for circut racing and hillclimb as it will gather heat quicker, but it will still maintain the consistency and reliability of the 595RS that we know and trust.

For those who need a tyre for drifting it will be better aswell as the carcas construction is stronger meaning less flex in the casing... Note: if you plan on drifting on 595RS-R you will need to have some serious power at the wheels because it is a pretty sticky tyre :P

Attached are some piccies of some drifters from Taiwan and the USA testing the new tyre... Looks good when its smoking!

Enjoy.

post-17958-1196294643_thumb.jpg

post-17958-1196294656_thumb.jpg

post-17958-1196294668_thumb.jpg

post-17958-1196294678_thumb.jpg

post-17958-1196294698_thumb.jpg

Edited by Bullet32
  • 3 weeks later...

Just another quick update guys, girls and Michele... :)

I am very happy to announce!~

We have a new Exclusive Motorsports dealer in Mitchell... A little workshop by the name of TROJAN motorsports.

John and Angelo are now stocking Federal's high performance and motorsports range of tyres and as we all know they are magicians with Skylines, so go see the boys for a deal!

Tell them Mick from Federal sent you :laugh:

Edited by Bullet32

Go Go Daijiro!

Last volume of option I watched had him driving in a D1 car with his head sticking out of the sunroof while the driver belted it around the track :whistling:

Back on topic, I guess I might have to look into a set of these federal doohickies once the rubber i've got at the moment don't stick no more.

I'm pretty impressed with the 595's. I actually feel safe to drive in the wet now...lol

I have not got them to lose traction at all yet.

Thanks, Mick!

We couldn't agree more, we have far better traction with the 595's in the wet than all other tyres we have here put together.

We couldn't agree more, we have far better traction with the 595's in the wet than all other tyres we have here put together.

That just seemed like one of those dodgy late night commercials where people get payed to pretend they actually mean what they are saying :) jk

Ill try em out when the Toyos run out.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...