Jump to content
SAU Community

Recommended Posts

i've been whoring the search tool on this forum and i still cant work out an answer.

very rarely the engine check light will come on, and when it does the knock sensor on the pfc reads pretty high. last night drove the car on a cruise for like 2.5hrs and knock sensor read 126 once. @ 4600rpm

during the night only saw it ever got to 40 @ one stage.

thing is i havent hear the engine ping inside the cabin.

some of the boys reckon i was shooting flames last night but thats just fuel dumping right when changing gears?

the car tuned @ racepace last year, and recently was retune there last month. b4 and after its pretty much the same, knock goes off rarely.

mods are TB 3" high flow cat, pod, cooler, 12psi, pfc and walbro fuelpump which is only 3 weeks old.

i'm thinking to get some splitfire coils, anyone got any thoughts?

Edited by eddieeeee-ro
Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/
Share on other sites

if you are not experieicning any pinging, you dont have a plug/coil problem so i woundnt suggest you get splitfires. Knock is really to do with the tune, so your tuner should be able to sort it out for you.

Recieved PM: no probs ;)

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3480321
Share on other sites

i was of the belief that since he is not experiencing any detonoation, its merely the pfc knock sensor. ie, something to do with the tune? my bad then

probably is the tune i.e ignition timing advanced too much.

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3480363
Share on other sites

i was of the belief that since he is not experiencing any detonoation, its merely the pfc knock sensor. ie, something to do with the tune? my bad then

The knock readings on the PFC may or may not be actual engine knock. Sometimes a noise in the engine bay at whatever frequency the knock sensors are set to pick up will set them off. Regardless, the terms "pinging" and "knocking" are both detonation.

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3480371
Share on other sites

i've been whoring the search tool on this forum and i still cant work out an answer.

very rarely the engine check light will come on, and when it does the knock sensor on the pfc reads pretty high. last night drove the car on a cruise for like 2.5hrs and knock sensor read 126 once. @ 4600rpm

during the night only saw it ever got to 40 @ one stage.

thing is i havent hear the engine ping inside the cabin.

some of the boys reckon i was shooting flames last night but thats just fuel dumping right when changing gears?

the car tuned @ racepace last year, and recently was retune there last month. b4 and after its pretty much the same, knock goes off rarely.

mods are TB 3" high flow cat, pod, cooler, 12psi, pfc and walbro fuelpump which is only 3 weeks old.

i'm thinking to get some splitfire coils, anyone got any thoughts?

Just go back to Benno with that info mate.

If you tell him 4600rpm, what gear and roughly what load, it'll be one cell that needs adjusting and it wont take long

Also your more likely to notice the one cell at night, as the air is colder. Mine was similar ages ago.

Hit about 80 on a super cold night only around 6000rpm in 3rd, one/two cells changed and happy days ;)

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3480472
Share on other sites

Ive had my car tuned a few times,as mods were added.My car sometimes shows knock of 80 for a split second at high boost and RPM.

Taken the car back a few times to sort it out.But i was told all is normal.Could be a number of things in the engine bay making noise.

I never hear any pinging but i do get a read of 80 at high loads on occasion.

Tuner is very reputable.And works mostly on Nissans.

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3481134
Share on other sites

I been having same issue, Due to heat. + more boost. + advanced Timing. from the Manual 120(ish) knock indicates Detonation. In agreement with R21Nizmaid, tuner should be able to fix by adjusting the problem cells.. (which I really gotta get done :S).

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3484686
Share on other sites

a power fc reading of 125 is false, if it was correct you would definately hear it even if you didnt know what knock is. The knock sensor has picked something else up and like explained above there are many things that create the "frequency" that the knock sensor is tuned to detect, even rocks/pebbles being flung up into the engine bay can set this off.

If you are driving around with the normal max knock sensor of 40 thats ok. Anything around a true knock reading of 80 or so and knocking or pinging whatever you like to call is audible. You'll know when it pings, its a very distint noise.

To make yourself sleep a bit easier, stick it on the dyno and get a pull done just to double check afr's and knock levels

cheers

Link to comment
https://www.sau.com.au/forums/topic/194037-pfc-knocking/#findComment-3484834
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...