Jump to content
SAU Community

Recommended Posts

guys,

looking into this firstly. IF I can get my hands on the consult software for the V35/M35 and IF it will sort out the display (IE english instead of japanese) would there be interest. looking firstly
if it works then I would be doing the cars (as requested) at compliance here in brisbane. THIS WILL NOT FIX THE NAV!

I'm getting 2 or so requests a week for the whole system to be put to english so I may as well do something about it smile.gif

who's interested?

THIS SERVICE IS NO LONGER AVAILABLE!

Use the info in this thread but do not contact me about this!

Link to comment
https://www.sau.com.au/forums/topic/194126-software/
Share on other sites

yep. waiting on a email reply so I can see what I can change on the chassis/body electrics :glare: could well affect the radio and TV but I WILL NOT know until I get a reply.

I know on my van (2006 holden combo) I can specify where it is and change a few things on it . radio settings being one of them. I figure this one may be the same.

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3481412
Share on other sites

Hmmm. I thought this was dead and buried! I am interested in the method that you are trying. With the setup at a local workshop I can change BCM settings on my 2003 but haven't seen any indication of being able to change anything to do with the AV. Not through the consult anyway. Might just be that we have the old or generic Nissan version(we can't do any NATS stuff either).

In response to your question, if it's cheap like under $50 then I would think the consumer would be interested. If it's a major investment then I don't think there would be huge interest simply because it won't give any additional functionality and you get used to navigating the menus without knowing what they say. Others may have a different view.

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3481961
Share on other sites

With the setup at a local workshop I can change BCM settings on my 2003

Hey SKiZO, you didn't happen to see if you could adjust (remove) the "beeps" in the BCM, such as the door open with ignition key in, or the very annoying reverse beeps on the auto model.

At the moment I'm considering removing the speaker all together, but then would loose all the warnings....

Back on topic, I'd be quite suprised if the GUI programming was accessable through CONSULT, but you never know. I noticed that you can get the whole set up from a US G35 on ebay, but then that would be in MPG etc.

I'd be interested Chris, if you were able to crack it.

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3482077
Share on other sites

I'm looking at the USDM offical consult. its not a GUI based thing. (IE not consult 3) I'm waiting on a reply from a few places O/S before I commit to anything. as for Fees- yet to work that side of it out. to me it would be a fee at compliance. don't want to pay it - no probs. estimated cost of the thing is a 4 figure sum that I would amortize across 30-40 cars.

I'll leave it at that for now.

skizo,

wouldnt mind a chat with you when you have time.

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3482116
Share on other sites

Hey SKiZO, you didn't happen to see if you could adjust (remove) the "beeps" in the BCM, such as the door open with ignition key in, or the very annoying reverse beeps on the auto model.

Sorry mate it's been a while and I can't remember all the functions you can change. I don't want to give you false hope but I do vaguely remember something about that being in there. I'll be back there in a few weeks and i'll test it out for you. ps. I like the chimes! I forget my lights on and it tells me. I don't like the reverse one though...

The beeps when you lock the car were definitely not in there though :D

Sure Chris, PM me.

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3482272
Share on other sites

Forgot to mention the other day Chris, that there is one more faint glimmer of hope on that front.

When you go into the Diagnostics/Settings menu of the NAV there is one menu in there on mine that is greyed out and if I'm correct it is actually the languages setting. Whether it was actually implemented is another matter. Of course I may be totally wrong, but we need the smelly monkey to tell us what it says.

Oh and is it the same for the rest of you guys? Go into the diagnostics menu(INFO+DISPLAY for 5 seconds at any time) and then the settings screen. Maybe someones is unlocked!

post-2302-1195625916_thumb.jpg

post-2302-1195625925_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3488835
Share on other sites

Forgot to mention the other day Chris, that there is one more faint glimmer of hope on that front.

When you go into the Diagnostics/Settings menu of the NAV there is one menu in there on mine that is greyed out and if I'm correct it is actually the languages setting. Whether it was actually implemented is another matter. Of course I may be totally wrong, but we need the smelly monkey to tell us what it says.

Oh and is it the same for the rest of you guys? Go into the diagnostics menu(INFO+DISPLAY for 5 seconds at any time) and then the settings screen. Maybe someones is unlocked!

I've done that with the one I have here. noticed the menu you pointed out. this one is greyed out. going to try somehting outside the square. nissan dealership :) still waiting on infiniti to get back (I'll chase them in the morn again.) to me.

theres a few things in diagnostics that point to language but I believe its still software based.

going to look on ebay for a part number to compare what I have vs the 'correct' version.

btw the buttons and screen are just that..

skizo,

the CD's you have - what EXACTLY are they - maps or data?

Edited by Chris Rogers
Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3489589
Share on other sites

nice, i'll try it tonight

how do you get out of diagnostics mode?

turn the car off.

bring me a USB stick and I'll drop the service manual on it for you :)

I'll grab a few high res pics of the service screens.

actaully - I'll pull shots off the service manual.

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3489617
Share on other sites

pull the DVD firmware version up on yours - I'll take a few snaps of the one I have here. want to compare notes.

need someone to translate the SERVICE menus on this thing. theres 6 other menus that are not listed in the G35 manual. (CBF looking at the V35 one - too hard to read!)

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3491838
Share on other sites

Japanese to English

There is a ROM disc available in Japan. Nissan part number B8227-C9913 About 10,000YEN.

Not sure how deep the conversion goes may only be for the Sat Nav and not the menus or vice versa.

I strongly suspect it will only work on the sat nav so have not been in a hurry to go through the hassle and cost of getting one. I.E. tell you in english where in Tokyo bay you are driving not Aussie maps etc.

But if anyone else wants to give it a whirl there's the number.

Link to comment
https://www.sau.com.au/forums/topic/194126-software/#findComment-3506659
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...