Jump to content
SAU Community

Recommended Posts

industrial truck cleaning cleaner called "RIP OFF" if you leave it on to long it will turn them yellow. Also use it on the paint work (quickly) all the bee stains, bird shits ect come off just with water. Again have to be quick otherwise i would have a pale yellow 33 :)

the only perk of work is the cleaning equipment

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489228
Share on other sites

don't use rip off on paints that don't have clear over them though (white, red) as it strips the polish.

but yeah rip off works killer on brake dust.. just don't leave it on the wheels as yeh it corrodes them. and high pressure hose at the carwash for example to rinse em.

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489266
Share on other sites

soapy water is what i use, have to be careful on what cleaning products you use with chrome wheels ect.

so i use soapy water...

i guy i knew bought a set of chrome wheels for his commy and the day he put them on he went to a car wash and used the high pressure washer and it took the protective layer over the chrome off which left yellow looking marks over the wheel. they were the BSA brand wheels, but this was a few years ago, wheels have come along way in quality.

Edited by 4drftn
Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489299
Share on other sites

if its just light dust from like 2 or 3 weeks of driving i usually use the TYRE CLEANER from happywash, you have to wait about 30 seconds before the real shit eventually comes out the nozzel but THAT combined with time washing the rest of the car and HIGH pressure rinse, they come up a treat... but most happywashes, dazzlers n shit never top the shit up so forget everything i just said LOL

For the older dust thats been on there for a while you should use some of that elbow grease, always works a treat.

Edited by Ryanrb25
Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489328
Share on other sites

soapy water is what i use, have to be careful on what cleaning products you use with chrome wheels ect.

so i use soapy water...

Couldnt recommend anything better, i just fill up a bucket of warm soapy water and wash away, bit of a nuisance washing the inside (anyone with impuls will agree) but completely white rims look nice. I used "Hot Rims" and it made my discs change to a dirty colour and started squealing after just getting them machined..

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489337
Share on other sites

thanks lads!

cos i have gheto spec rims that i painted with a couple cans of black spray paint, to minimise the paint chips n extra work respraying, im gonna try the hot soapy water and a kenco brush... elbow grease is probably the best option :)

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489340
Share on other sites

*waits for cara to say permaguard is the shit* lol

but yeah if crome make sure u get something that says crome safe. meguires have a wheel cleaner that is crome safe if needed.

soapy water and a chamois will do the trick.

Link to comment
https://www.sau.com.au/forums/topic/194691-cleaning-rims/#findComment-3489368
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...