Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Kkr's aren't shit ..

however the kkr430 would have been the better option... unless you want to use it for just drags etc. it's not going to get great response with a stock engine,

John Cane runs (drifter) runs a kkr430 on his Rb25det in his laurel and it goes awesome!

Read specs here > otomoto

I beg to differ.

This guy is making 219rwkw using 19psi and only making full boost at 4500rpm: That is complete SHIT!!

A turbo that only makes 220rwkw should be on full song by 3300rpm. That power is equal to a hi-flowed rb25 turbo at 15psi and look how responsive those are; WITH A STD MOTOR. Not to mention the extra boost required with the KKR shit, is putting more stress on the rest of the motor and creating more heat.

I have previously heard these KKR turbos were laggy, for the power they produce; this has just settled the debate. At the end of the day they are another cheap, China shit turbo that are inefficient and can't make the power with acceptable response.

HKS :D

KKR :(

looks like its hks time lol

when i drove his car with the 2530 it felt like a stock turbo but had alot more mid range/low down torque felt nice, he was only running stock injectors still so car was not really making much more power then mine but felt nice

looks like ill go with the hks item:D

is mid 12s @ 115mph possible with the 2530 turbo?

looks like its hks time lol

when i drove his car with the 2530 it felt like a stock turbo but had alot more mid range/low down torque felt nice, he was only running stock injectors still so car was not really making much more power then mine but felt nice

looks like ill go with the hks item:D

is mid 12s @ 115mph possible with the 2530 turbo?

12s are possible on a stock turbo :D

only making around 295rwhp

yes its laggy bout 4500rpm full boost

the car with 2530 on it i took it for a drive last nite, very good low down torque and mid range wheel spins coming on in 2nd but yeah

i dunno wot to do lol

help me!!! some ppl say 2530 2 small for rb25? im only really after 300rwhp would 2530 get me there easy enough?

what are your other mods, other people in the rb25 turbo dyno thread are making 260rwkw. what are you maxing out?

car come over with 200,000kms phil told me that 6 months after i bought it lol

yes u mite get 12s at 106mph with stock turbo but i want big mph not shit mph lol there is a difference

2 weeks ago i ran a 13.5@102mph in a complete stock r33 on 10psi:)

but it never felt fast cause mph was shit house.

basically the dyno i had my car tuned on made X amount of power

a mate had his car dynoed on same dyno and made 203rwkw or something like that

he went and got a power run on milanco dyno which is a brissy tuner and made 240rwkw or there bouts.. so that mite be my 260rwkw who knows... remember its only tunning tool

Edited by l0WRB
RB30 it and keep the kkr :D

Even with an rb30, the turbo (kkr) is still shit. You'll make more power, better response, and use less psi; if you use a Garrett/HKS/Trust/Apexi/etc turbo.

I am currently building an rb30det and am using a Garrett GT30R (500hp). I am expecting this combo to be more responsive than a rb25 hi-flow, on a rb25; yet make 300-330 rwkw :(.

f**k the rb30 lol

my car is budget and it does 500kms a week its my daily so yeah

well i would be happy with 112mph and 12.5-12.8s and 2sec 60ft's lol

better then my 13.3s and 2.4 60fts

mid 12's at 115mph?

I have an old timeslip at home from WSID, running my hks 2530 on 100% stock motor, no special suspension just re55's, if i recall correctly i ran 12.5 @115mph, with a 1.9sec 60ft! i will try and dig up the slip later to confirm.

If i remember, peak power at the time was just under 218rwkw. Its not the peak that you feel with the 2530, its the punch it gives you mid range, which is fun and makes for great overtaking :(

I enjoyed the 2530 every moment i had it, but the 2835pro i have on it now, :D -but then if its a budget consideration forget it..

Reading this thread the answer is very clear. Whats the point of a daily driver that hits f*kk boost by 4500? Especially if its only making small kw's go for the response :dry:

you still have not mentioned what other mods you have, if you are still running standard injectors, afm and fuel pump then that will be a problem, also do you have a boost controller, wouldnt be hard to set up an avcr or something with lots of settings wrong.

LINK ECU, MAP sensor

700cc injectors

3" dump/exhaust/gutted cat

button clutch

gktech cooler kit

lol at 700cc injectors for 210 rwkw.

but dont stress my last MPH was 116 for a low 13...hahah more to t a good time than a lot of power... I would go the HKS...get some good response and have a nice fast street car.

As mentioned , the figures you quoted are way crap.

looks like its hks time lol

when i drove his car with the 2530 it felt like a stock turbo but had alot more mid range/low down torque felt nice, he was only running stock injectors still so car was not really making much more power then mine but felt nice

looks like ill go with the hks item:D

is mid 12s @ 115mph possible with the 2530 turbo?

I had a 2530 setup on mine, making 225rwkw at 19psi. Best with this setup was a 12.55@113mph. Was a nice easy street setup.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...