Jump to content
SAU Community

Recommended Posts

had a drive of a couple of cars we installed the copies of my kit on... and they're not exactly what you'd call streetable. at the end of the day if I put the kit on my car I wouldn't be able to thrash it around like I do now, and I'd hate to be forced to baby it around for fear of ruining it.

Probably OK for a show car that'll sit n look pretty or a drift car with a workshop/sponsor backing that can afford to throw it around... but for me the impracticality kinda won in the end.

ugh... we sell the copies of the kit for $3500, fitting and painting really depends on how much prep work you want done... if its a matter of doing it ghetto (bog and rivets) then it'd be cheap... but the way we do it is to take the panel back to metal to allow the fibreglass to bond better, then prep and paint.

here's one we're doing atm:

post-256-1196077537_thumb.jpg

the owner originally went to some bodyshop that did a really shocking job of it... when we got it there were more ripples on that kit than a pond on a rainy afternoon... so a lot of time was spent getting it smooth and ready for paint. Its a little different in that its getting an R34 front... but he's using the R32 wide guards, rad support and front bumper... which looks a little wierd as the R34's front is usually a lot higher than an R32... but hey, what the customer wants, the customer gets.

  • 3 weeks later...

sure... the black one's finished, and sporting 10" wide 18" gold VS-XX's. The pics are at the workshop, so I'll post some pics up when I'm there next. It should be at autosmellon as its being built up as a show car.

oh and the kit in the pics is now sold :thanks: keep thinking I should've just put it on my car :domokun:

we do em at the workshop using the original lever assembly, relocated, so you can still release the fuel flap from inside the car. some people go ghetto n leave it off, and others leave the original one on with a step in from the wider guard to show that its a widebody.

i have 12" wide wheels on the rear on mine and could easily fit 13s, i no fitting a gtst to kit to a gtr will bump them out bit more but 3"s, iv always wonder why that is,

u got any suggestions funkymonkey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...