Jump to content
SAU Community

Recommended Posts

if you can get my wipers working i will give you $50.

car is a r32, has a rb25 in it.

any help?

i am in syd so you can come around and fix it on the weekends

if you think u can do it, pm me.

cheers

There's your problem right there.

$$$ Pay up...

if you can get my wipers working i will give you $50.

car is a r32, has a rb25 in it.

any help?

i am in syd so you can come around and fix it on the weekends

if you think u can do it, pm me.

cheers

I would try and have a go at it myself first if I were you.Start from one end and work your way back to the other.You said they worked fine prior to engine conversion.I am assuming that there may be a harness plug thats not plugged in.Try the fuses first.sometimes the switches in the instrument surrounding get a little dicky at times.

$132 an hr, no wonder your car is the way it is.

haha i know, his car is so hot!

yeah ive checked all the fuses 3/4times

the harness plug is plugged into the wiper motor.

mechanic checked this morning for power and shit and its all fine

its just that when upgrading to a rb25 & r33 loom in a r32, you gotta bridge a few wires to get it working,

i just nmeed to know which wires they are..

don't be a tight ass, take it to an auto electrician

i can fix it if u bring it to the shop but it will most likely cost more than $50

Nice way to lure the customers champ :rofl:

i charge $132 an hour

im a mechanic and auto elec

:( How can you sleep at night...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...