Jump to content
SAU Community

Recommended Posts

I am sure this effects you all *this* much :) but yup, went in today to the MacLeod station (near Latrobe uni) and all clear. Went into there at 11am, and 15mins later was out of there. So all up 90mins of driving out there and back for a 15min test.

Exhaust I think was 87db and CO levels way under. Glad I didn't have to change my exhaust for stock, that would have been a pain in the rectum.

He even said how nice my car was and apologised for wasting my time :( - and I told him "well its the cops fault not yours". So all is good.

If anybody wants any pointers or advice, or need the "required items" let me know.

Basically - just ensure you have a stock airbox on, stock boost solenoid, exhaust under 90db (doesn't have to be stock) and stock computer (these are all checked) and you'll pass fine. Big FMIC is fine as its only one intake modification.

:Pimp:

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/
Share on other sites

If you ever get called up, your new beast will probably just be tested as a GTR.. so just tell them it is :( I don't think they'd be expert enough to pick its not. Apparently as the Skylines aren't produced locally they don't have any concrete guidelines.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413664
Share on other sites

HA!

with those turbo's lol!!!

rightyo.

Anyhow. Well done Gordo. Micght need that airbox one day lol!

and zorst... :(

good thing i still got my STOCK ECU... it's just been 'enhanced' somewhat :)

i'll put money on it that it's better than the stock settings anhow.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413726
Share on other sites

theyll pick it up as not being a gtr pred, i dont take them for not being stupid

infact he double checked my car inregards to it being an actual turbo model

the problem with Jet is the RB26 ISNT stock in a GTSt and hence hell get royally screwed

i know someone that had a coroller that dropped in a 4agze, the she got EPA'ed pretty badly because it wasnt the engine the car came out with from factory (in australia)

although they are like that in japan, the problem is the engine WASNT in from factory in australia

screwed

they know their GTRs from their GTSts

im sure they deal with skylines and VL's everyday

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413737
Share on other sites

Yer, well depends - there are a few different testers. He didn't pop my AFM like yours and only checked the ECU with a casual inspection. Depends who you get I suppose. No I agree, they aren't stupid - nice guy. They're not the bad guys, but everybody knows that.

I'm pretty sure you'd get fried for an aftermarket turbo or engine - its kinda obvious. Highflow a stockie though and you'd probably be fine. Doing a full engine or turbo swap for an EPA test wouldn't be fun thats for sure. ... Just remember that guys when doing your mods.

If you are called in by a nasty copper - you'll need a full engineers certificate done and full EPA certification to get it back on the road... $1000's

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-413797
Share on other sites

...exactly... Its such a grey area.... there is also nothing to say that Vicroads and the EPA agree on their standards either. Just because the vehicle is road registered doesn't mean that its what the EPA thinks is compliant.

I mean for the less well known vehicles, they have basically no idea what it came standard with, what its standard emission controls are, or anything else. So who knows..but there only has to be somebody, somewhere out there at the top that goes "nope" and then you're screwed.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-414297
Share on other sites

Being registered with a different engine type does not make it legal, in regards to epa and roadworthy.

Half the time you can walk into an RTA and tell the clueless person behind the counter "my original motor blew up and had to replace it with a rb26dett, engine number ##########". They wouldn't have an idea what you are talkin about. But when being inspected, the inspectors generally know their stuff (not talkin about street cops).

But you don't worry about this 5hit until you need to.

Link to comment
https://www.sau.com.au/forums/topic/19680-passed-my-epa/#findComment-414425
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...