Jump to content
SAU Community

Recommended Posts

Went down to see the boys at Creatd Motorsport last Friday just to get a check on the car to see if anything was up and a readout.

engine/performance wise only mods are:

-Gtech (Hybrid copy) FMIC,

-Drift Pod (with induction piping where old factory intercooler pipe was)

-boosted about 10.5psi

-full exhaust

stock: ecu, turbo, fuel pump, injectors, coils ect..

first run managed 196.4rwkw, was shocked as i was only expecting like 180. Then the second run it pumped out 200.5rwkw.

they said air/ fuel mixs were really good, and the curve was exeptional for a stock ecu with the mods

so yeah extreamly happy with the result.

just thought id share.

cheers

post-35246-1197270608_thumb.jpg

Edited by jake33
Link to comment
https://www.sau.com.au/forums/topic/197039-dyno-result/
Share on other sites

MBS206.. i call brand new state of the art dyno dynamics dyno :P i made 206 on that one and 205 on another (the other was without pfc/straight thru exhaust/injectors) and ran 13.1@105mph :P

the tuner of that blokes car wont make up crap to keep the customer happy.. if the car makes 20kw or 400kw, then so be it.

Edited by LTHLRB
Link to comment
https://www.sau.com.au/forums/topic/197039-dyno-result/#findComment-3524750
Share on other sites

like mentioned above, numbers are numbers, track speed at the 1/4 mile is a good indicator of its true hp, not saying your result isnt accurate.

imo a dyno is just a tuning tool, i've seen far to many variences from dyno to dyno to believe hp readings. The only way to accurately compare cars on a dyno is to have one after another on the same day and same dyno, otherwise there are too many variables.

as long as the afr is safe, and its not knocking you should be happy

Link to comment
https://www.sau.com.au/forums/topic/197039-dyno-result/#findComment-3524838
Share on other sites

Well yeah im very happy. Ha yeah the guys at Creatd said people would label it as a 'happy dyno' I even called B/S to it when i was there.

As said above, its a brand new dyno (6 months or so..) and has been checked/serviced and calibrated twice according to them. They claim its is extreamly accurate.

Considering i leterally drove it in and it went straight on to the dyno, with no fiddling, with timing or anything, and that was the result, im happy.

They almost didnt believe me when i told them the ecu was untouched and they suspected a re map, (hence why they checked after the first run) and for what mods im supporting we were expecting atound 170 to 180.

They also said its rare but not completely uncommon that it makes this sort of power considering the minimal mods.

some people only get like 160, where as some people will get 210 or whatever.. same car, same mods will have different readings due to condition and how well they are taken care of.

At the end of the day. its just a power run, im happy.

cheers

Edited by jake33
Link to comment
https://www.sau.com.au/forums/topic/197039-dyno-result/#findComment-3525367
Share on other sites

no.. above said shorts have the usual sport short, inner undie section.

thus eliminating the need for actual undies.

Also, I will add that this result was with loss of traction.

If I had a new pair of Nikes and deflated the air bubble down to 15 psi, I would have no doubt cracked the 160kw mark.

AND

intake temps were 23 degrees and on a few odd occasions, the exhaust temps went up in small burst to about 45 degrees. :D

I think I had a few missfire issues on that run..

Next dyno day, I will have the new nikes, remove shirt for extra weight reduction.

I'm thinking I might add a bit of octane booster... I saw soem the other day called Mars... it came in bar form.

"I only eat things in Bar From"

Link to comment
https://www.sau.com.au/forums/topic/197039-dyno-result/#findComment-3525801
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...