Jump to content
SAU Community

Recommended Posts

Sign the Victoria Park Support Petition

Wednesday, 12 December 2007

vicpark.jpg

render_20071213_350.jpg

The rejection of the proposed Victoria Park grandstand by the Adelaide City Council as a result of a vocal campaign by nostalgic minorities is a backwards step for Adelaide and South Australia as a whole. It is a short-sighted decision based on fear and not reason.

The Victoria Park grandstand is a visionary project designed to provide permanent and superior facilities for the award winning Clipsal 500 event. Such a project would enhance our competitiveness in being able to retain if not bid for more world class events, which add to the vitality but also to the economy of our state.

Furthermore the proposed grandstand would facilitate the renaissance of Victoria Park into a premier horse racing venue, something which the under-utilized and tired facilities of today are incapable of achieving. The Victoria Park grandstand would allow Adelaide to put its best foot forward.

A permanent structure on the parklands is not a threat to our unique parklands, but rather an enhancement. Had it not been for similar visionary projects, we would not have Adelaide Oval, the zoo, Adelaide University, the Museum and Art Gallery amongst many other structures built on the parklands, which have become valued additions to our city. The proposed Victoria Park grandstand is no different.

As such, I as a progress-loving citizen of Adelaide or to the state of South Australia hereby declare my full and un-wavering support for the Victoria Park re-development in its full and original form.

To sign the petition please follow the link here : http://www.sensational-adelaide.com/petitions/vicpark

Note: You can ignore the donation message on ipetition website after you sign.

Good work Howie!

Having worked on both the initial proposal that was rejected by ACC and the demountable structure that is now proposed, it is such a shame that this development has been stopped. There's no other city in the world that has the potential to access so many major events from within 10mins from the CBD. To have the ability to walk to the cricket, tennis, festival centre, convention centre, and what would have been the horse racing and motor racing, would have given such a boost to the life to the city. It is of upmost importance that Adelaide is city centric to keep moving forward. Thing is, the SAJC will probably end up moving out of Vic Park altogether which means the eye-sores that are the dilapidated buildings along Fullarton and Wakefield Rds that are there will be there to stay.

All this because of the very influential East End residences that consider Vic Park as their own personal back yard.

p.s. jeez that's a pretty old image you have there Howie! i'll post up a slightly more updated image if interested.

Also Nick. Would love an updated render if you have one mate!

Btw, so far we've got 100 sigs on our first day!.. our aim is now 1000 signatures before the 23rd December (weekend), it'll be going in the Sunday Mail - hopefully this will give the gov a mandate from the people.

Also Nick. Would love an updated render if you have one mate!

Btw, so far we've got 100 sigs on our first day!.. our aim is now 1000 signatures before the 23rd December (weekend), it'll be going in the Sunday Mail - hopefully this will give the gov a mandate from the people.

No worries. I've forwarded the petition to the entire office so wait for the ball to start rolling. Unfortunately it looks like the online petition is limited to the single IP address so they'll have to sign in from their home computer since i've already signed it.

Edited by webng

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
    • If you are Ecutek tuned then these TCU tunes are anywhere from $550 to $700 usd. If you are not ECUTEK tuned, then it gets costly!    
    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
×
×
  • Create New...