Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

it would also be interesting seeing how they ran the exhaust, considering its normally on the other side. Especially with the driveshaft going to the trasfer case, i wouldnt think that would leave much room for a nice flowing exhaust

*edit* just watched the video, its got some big bends putting it back on the "right" side

Edited by R34GTFOUR
i doubt gtr boxes of any sort would last long behind a 7L motor lol

well i never said i had the details worked out perfectly. there would be a lot of issues, but damn it would be fun. even better when you chuck a set of turbo's on it. room might become an issue though

well i never said i had the details worked out perfectly. there would be a lot of issues, but damn it would be fun. even better when you chuck a set of turbo's on it. room might become an issue though

dont worry ive had the idea of a ls2 in my 4wd stagea for a long time but the gearbox is the main issue as it wont last with the torque of the motor, might be ok stock but with mods its not gonna survive.

Dumb, very dumb. BBQ'd brake master cylinder, clutch master cylinder and slave cylinder, not to mention an overheated transfer case with any decent use. Basically flawed thinking with no real advantage.

Cheers

Gary

  • 3 weeks later...

i guess it was the old "lets do something no-one else has done"

for the same money time and heartache think of the sweet setup the could be pushing out of the RB???

it is odd how nissan japan never sized up to toyota and stroked RB a rb30e has a 6500 rpm redline i am sure with the minor changes to the motor they could have done the RB30DETT put it in a SPEC series car sold it for a bit more

It has actually been done and the work was performed last year in Bangkok by a well known local tuner named OTTO SHOP.

This modification is not for the first timer as a lot of work needs to be done to make it all work well. Engine swops are big business here in Bangkok but a modification like this involves much more work compared to a standard engine swop.

Much aluminum welding to the gearbox has to be done to get the gearbox fit the 2JZ. Exhaust also comes down on the other side of a JZ engine and needs to find a new way under the Skyline without overheating the clutch. Other things must also be customized but the gearbox modification will be the big thing.

The reason for them doing this modification was simple. To buy a second hand RB26 engine is much more expensive than a 2JZ as the 2JZ is not only found in the Supra but also in more common models and therefore more available as second hand.

The OTTO SHOP also wanted to exeperiance their work with a modification like this. These guys are good and know very well what they are doing. They have built numorous performance cars and engines in Thailand.

In Bangkok there is also a huge number of very skillfull aluminum welders so in many ways this was a great mod for them.

3:50 into the first video and you can see some of the welding and cutting that has been done to the gearbox. SORRY BUT YOU TUBE DOES NOT ACCEPT THIS FILE OF 141 MB. WILL TRY TO FIND A SOLUTION FOR POSTING IT LATER.

The car has a OS 6-speed sequential gearbox and in this video you can see it accelerating 2 times through 1st to 5th gear on one of Bangkoks highway`s.

The video is from a VCD which came with the magazine and I dont know how to extract the file from it. Thats why its shot from my TV screen.

The text in the magazine and the video is both in Thai.

Hope you enjoy it.

http://www.gtr.co.uk/forum/upload/87646-r3...l?highlight=2jz

Video: http://www.scmotorsports.ca/public/media/CIMG0274.AVI

Edited by MintR33
  • 2 weeks later...

well thats definately different. good on them for breaking the mould. but i think i only would have done it if i was converting to LHD then u wouldnt kill clutch, brake, etc.

EDIT: come to think of it, i remember hearing something about some1 in Aus or NZ that put a 7M GTE in a R32 GTR

Edited by Raysboostin
well thats definately different. good on them for breaking the mould. but i think i only would have done it if i was converting to LHD then u wouldnt kill clutch, brake, etc.

EDIT: come to think of it, i remember hearing something about some1 in Aus or NZ that put a 7M GTE in a R32 GTR

it was in Aus and it was actually a r32 gtst with a 7m, ran 9s on its first night at the drags (built by Rigoli from memory), the 7m is now in a datsun 1200 i think

I caught up with an old friend over xmas that had spent his spare time squeezing a twin turbo supra engine into a 3rd gen Celica, don't know what was funnier? The fact that it looked like it 'belonged' there and was quite well done, fully engineered job, or imagining the looks on some rural V8's getting owned (...by that I mean, "horribly raped") by some ugly as a dogs bum, kind-of-red, stock-shitter 1980's hairdressers car. :D

I caught up with an old friend over xmas that had spent his spare time squeezing a twin turbo supra engine into a 3rd gen Celica, don't know what was funnier? The fact that it looked like it 'belonged' there and was quite well done, fully engineered job, or imagining the looks on some rural V8's getting owned (...by that I mean, "horribly raped") by some ugly as a dogs bum, kind-of-red, stock-shitter 1980's hairdressers car. :D

That's awful. One of if not the greatest Japanese engines pre R35 in one of their worst cars.

WHY?!

just like dr evil said to the mole with the mole "ABOOOOAAAAAHHHH" as in= this is just not right. i love 2jz's and rb26's but each to their own.... why not make a supra 4wd ????? why the hell put a 2jz in a gtr it doesnt need it..!?!?!?!

sure there is a big drive to do something unique in the world of motor sport but this just seems like a waist of time and money(as stated before yest brake cylender/clutch slave and master would get too hot cos of turbo on the wrong side!)

yay for being different but nay for one big f**k up!

rb26dett is the only engine that belongs in r32/33/34 unless it has a 30 bottom end.... that still makes more sence than a 2jz!

just my 2c worth

woulndt be too big of an issue with heating the brake master etc if you do it right, look at how many supras are out there, how often do you hear about them having brake issues due to heat?

  • 2 weeks later...
it was in Aus and it was actually a r32 gtst with a 7m, ran 9s on its first night at the drags (built by Rigoli from memory), the 7m is now in a datsun 1200 i think

wow a 7m in a 1200 id like to see that!! must be a neat fit!

i love 2jz's and rb26's but each to their own.... why not make a supra 4wd ????? why the hell put a 2jz in a gtr it doesnt need it..!?!?!?!

engine conversion is slightly easier than chassis redesign/modification. plus, the GTR is already very well set up chassis and 4wd system. putting a new engine in it will give it more/nicer power to use, putting 4wd in a supra you will have to not only fit it all, but the chassis isnt considered to be as good for handling,, and then you'd still have to tweak the 4wd system too

and for person above, it was indeed a GTS, not GTR

Edited by VB-

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...