Jump to content
SAU Community

Recommended Posts

sure it's OEM front bar? fits well at the ends (where it usually overhangs) could be East Bear?

its not OEM, its still got standard GTT guards so its impossible to be OEM. if they were OEM the front bar wouldnt even fit on the car with the narrow gtt guards. the question is if the front bar is a East Bear(ud have the best bet of telln ss8) or some jap copy.

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Andru, a lot of people, especially in HK, can't be f*cked mucking around with the GTR bumper and just bolt it straight up and just squeeze it on there, but always looks weird....

you can cut it in half, narrow it, and then plastic weld back together (in theory) there-by having the bumper fit the guards better, but i've never "knowingly" seen a GTT with that done.

If it it has the whole lower lip/spoiler section AND fit well at the guards, does kinda tend to mean it's East bear.... too hard to tell without looking at it in the flesh

Andru, a lot of people, especially in HK, can't be f*cked mucking around with the GTR bumper and just bolt it straight up and just squeeze it on there, but always looks weird....

you can cut it in half, narrow it, and then plastic weld back together (in theory) there-by having the bumper fit the guards better, but i've never "knowingly" seen a GTT with that done.

If it it has the whole lower lip/spoiler section AND fit well at the guards, does kinda tend to mean it's East bear.... too hard to tell without looking at it in the flesh

realli??? i wasnt aware of that? the gtr bar sticks out quite a bit, shaving and bending a bar so much i would of thought it would cause alot of stress to the bar making it very weak.

but if it does the job then npz i guess lol. i havnt realli aligned a gtr bar onto a gtt but im aware its a big diff in size

about it being east bear or not, wat i was trying to say is i cant tell, because ive never seen em in person, but u never know if its a custom one off or something u no? thats why i said ud be the best person to find out if it was or not since u have one.

Edited by R34NRG

I rekon this car looks ace! Even better if its an East Bear item, the GTTs look funny when they have GTR front gaurds because they dont suite the fat ass rear. Knowing its a chicks car makes it even hotter, Would be awsome seeing you in this Ferah :banana:

Brad.

LoL i know but it leaves in January! So by the time it gets complianced and rego'd...who knows!!

Hey got piks of the rims? If u want PM them to me, i may b interested in buying them..

Don't have pics Ferah.. there at the workshop. Called Work VS or sumthing with 5 spokes. Probably abit wide for the 34..but i'm sure u can go wide-body to make them fit! :banana:

Tai im going to have to swing past then :thumbsup: to check em out!!

and R34NRG and ss8 gohan, I was told it was an original front bar. So as ss gohan has already stated, they have obviously cut and chopped the bar from the middle to make it fit. They told me its not fibreglass and is made of plastic. So weather its a GTR bar or an east bear bar its one of the two i guess

  • 3 weeks later...

Nice car......

I assume you've got a compliance workshop already, but if you don't we can give you a good deal, and we have all the stock parts you need. (we swap during compilance for free, we don't pull b.s. about tyres, extra charges, etc.).

Give us a call at our showroom 03 9415 7150 if you're interested. (ask for Jon)

cheers,

david @ carizma

Haven't heard about any changes.....usually people put Halogens on for compliance and registration, then swap them back.

what's the go with Xenon headlights these days for the R34, i heard something was going to change in regards to compliance for them?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...