Jump to content
SAU Community

Oils - Engine, Gearbox, Which Ones And Where To Get?


Recommended Posts

Hi all,

Went down to autobahn today to pick up some Redline shockproof, but it seems they don't sell it anymore.

Where can I get some in Adelaide? Northern suburbs preferred if possible.

Cheers.

Edited by Ionos
  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

dont use redline in your gear box its not good for jap gear boxs ask michael at auto barn mile end and mark tillbrook as the components in the oil isnt good and can cause alot of damage!!

Well, all reports I've heard are that it can work wonders on a worn gearbox. I've got a bad crunch going into 5th gear. I also used it in my last skylines with no dramas, but open to hearing alternatives short of a gearbox recondition.

dont use redline in your gear box its not good for jap gear boxs ask michael at auto barn mile end and mark tillbrook as the components in the oil isnt good and can cause alot of damage!!

Hey Kel, nice to meet you the other night...........do you know what these guys recommend for a GTR engine and driveline and if so, any chance of putting bit of a list together, I should be dropping all the oils cos who knows when they were done....I've only had the car for 4 weeks.

Hey guys, I know you probably already have your favourite brands of engine oils (generally Synthetic) but has anyone considered ULX-110 which has all the advantages of Synthetic without losing the advantages of Mineral based oils. A guy that I worked with at Adelaide Engine Service for many years is the National Distributor for the oil which is now used by many Top Fuelers around the world including my mate Marco Elbe who runs a 6 sec Keith Black '57 Chev that you may have seen at the Extreme Horsepower Show...if you knew what Marco has spent on that engine you know he wouldn't use a mineral based oil unless it was fully tested and proven.....here's an extract from their website;

http://www.ulx110.com/

Performance Advantages: Our multi-grade oils for gas and special fuels such as top fuel and alcohol have been designed with the help of some of the top engine builders in the United States. Demulsifiers and anti-scuff agents have been added for extended protection. Dyno tests have consistently shown an increase in horsepower consistent with synthetic oils but with none of the bad side effects such as scuffed cylinders and piston skirts, detonation, and weak spark due to wet plugs. Better oil pressure during severe and continuous service applications along with a reduction in oil temperature of 20F or more is also a plus. Our 2 friction modifiers work together to coat internal engine parts which results in protection at start up, and reduction of internal friction by 38%. This results in reduced fuel consumption of 8% or more in most vehicles.

Like I said, I'm good mates with the National Distributor and would be happy to approach him for a group buy if the interest was there....ULX-110 may even help the well known problem with RB engines where too much oil hangs around upstairs causing alot of blow-by.

i have redline in my 31, running 25 box, has made the box feel alot better since going to it, been in there for a few months now, cops a thrashing once a month and no dramas yet.

I have also heard this theory too of it being bad but thought i would try for myself and my mechanics said it is a good oil and the amount of hours they have put into that car i doubt they would wanna put anything bad in it.

Oh and where to get it - fours n more can get the stuff in, would probly be cheaper through motor traders though.

Edited by skylineguy19

Hi gang,

Changed the thread topic since I got my answer, and some good discussion going on.

RB25DET gearbox takes 2.8L - more will go in but will cause problems. Some people fill it to the brim, that is not correct! You wouldn't fill your engine with oil to the brim would you?

http://www.skylinesaustralia.com/forums/Ch...+oil&st=20#

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Give it 40psi and send it to the moon
    • I suspect 550s are on the large side for happy operation with a stock/Nistune RB20 ECU. The Hitachi ECU doesn't love short pulse width operation, and the RB20 doesn't need much fuel at idle. Big injectors can be unpleasant. This could be contributing.
    • Yeah, I still don't know why the idle speed control can't catch the falling RPMs. In the Consult logs I see the AAC duty cycle rising, but suddenly it goes lean and the engine stalls. Anyways, the relevance here is the DW 550cc injectors are probably the same. So if OP has similar issues I would be tempted to finger those injectors as problematic for whatever reason vs the ECU failing for some reason.
    • Yeah, sort of blurring two different things together, aren't we? I just meant O2 feedback closed loop. I used to have a 0-1V LCD meter on my dash, wired directly to the O2 sensor signal. So you could easily see what it was doing. Normal running it would flick back and forth nicely. Slow down to an idle and it would keep flicking, as the ECU tried to servo to maintain stoich, but it would slow down as each swing happened until it would stay at one end of the scale. As I said above, the sensor heater is not enough to keep it hot enough when there is also little heat in the exhaust flow. Give it a blip and it would start swinging again, then peter out again. Meanwhile, idle speed control would run just fine, because unrelated.
    • It's not even O2 feedback, it's just simply when the ECU sees the closed TPS signal for whatever reason the idle will start steadily dropping until the engine dies. With the TPS adjusted to not trigger closed TPS it will idle at some ridiculously high RPM and something like 6 degrees of timing. In the absence of getting eyes on it personally and a lot of quality time doing diagnostics I couldn't tell you what the real problem was but it was interesting nonetheless
×
×
  • Create New...