Jump to content
SAU Community

Recommended Posts

Yo so i can get pretty decent deals on rims that my companies stores deal with but none of them really have anything decent.. most of them are crap quality rim companies and the decent ones like koya only really have 1 rim i'd want and not in the right size.

All the nice rims are like $3k + which sucks because i don't want race rims but i do want the sweet assed look

so anyone know anywhere i can get some FAKE black te37's in a 19X9ish size?

cheers

Edited by GTAAAH
Link to comment
https://www.sau.com.au/forums/topic/198587-fake-te37s/
Share on other sites

go 2nd hand all my rims have been second hand and ive never paid more than 2.5k with decent tyres... TE37's, VSKF etc all looked new and were in the offsets i wanted.... ie fkn big and -ve :banana:

Link to comment
https://www.sau.com.au/forums/topic/198587-fake-te37s/#findComment-3550986
Share on other sites

ah ok, 2.5k is still too much for me for 2nd hand 37's, especially since the car won't benefit from having lighter wheels on thw street ><

I'll probably go the koya race tek's then, i can get them for less than a 3rd of the price of 2nd hand 37's.. sucks though, 37's are sweet

Link to comment
https://www.sau.com.au/forums/topic/198587-fake-te37s/#findComment-3561418
Share on other sites

i think BSA made some fake ones, instead of saying volk rays, they say vork ravs

indeed they do. i think in black too., just take off the stickers and source some RAYS one or non at all. none the wiser

unless you a full blown race car driver, i wouldnt worry your only going to add .00001 second extra on you lap time plus you will save like 2 or 3g.

Link to comment
https://www.sau.com.au/forums/topic/198587-fake-te37s/#findComment-3574087
Share on other sites

indeed they do. i think in black too., just take off the stickers and source some RAYS one or non at all. none the wiser

unless you a full blown race car driver, i wouldnt worry your only going to add .00001 second extra on you lap time plus you will save like 2 or 3g.

Umm excuse me....save 2 or 3g??? More like 2 or 3 kg per wheel if not more...

Link to comment
https://www.sau.com.au/forums/topic/198587-fake-te37s/#findComment-3574115
Share on other sites

the only problem with these knock off's apart from the quality is the size, no one wants 17x7 or 18x8 and the offsets are usually pretty lame

you want 17x9, 19x10 etc

they make them for the try hard excel's and shit

try drifteks.. they came with my car i recently bought and they look alright and have decent width 17x9 and 17x8 the offset of the rear is good, the front could be a little better

excuse the ride height :P

http://members.optusnet.com.au/paveway_s1/IMG_0499_1280.jpg

Edited by mystery_kid
Link to comment
https://www.sau.com.au/forums/topic/198587-fake-te37s/#findComment-3574266
Share on other sites

the only wide rims (especially in 18, 19 inch+ sizes) are always expensive new, and the nice ones are usually pricey second hand too (if they even stay on the market for that long)

all the crappy Chinese or Taiwanese 'Vork Racing' by 'RAVS Engineering' and similar wheels are made in smaller sizes with pathetic widths (6", 6.5", maybe 7" if ur lucky) to suit FWD cars, and have huge offsets too

look at Commodores- even when they had 245mm tyres, the factory was still fitting them to narrow rims- hence when you look at aftermarket rims for them in 18" sizes, they are still fairly narrow

If you want anything over 9" wide and quality, to suit a Skyline, be prepared to spend some meaningful cash

Link to comment
https://www.sau.com.au/forums/topic/198587-fake-te37s/#findComment-3574330
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...