Jump to content
SAU Community

Xanavi Head Unit

webng

By webng,
in Four Door Family & Wagoneers

 Share

Recommended Posts

ステージア Rising Star

ステージア

Posted
Posted

This is just from memory so it could be slightly wrong

push the TV button on the left panel near the bottom

on the screen push the far r/h button to scroll thru something like this

TV(auto) -> TV(manual) -> AV1 -> AV2 -> back to the start

any probs & I'll physically check

good luck!

chook Mentor

chook

Posted
Posted

correct, but AV2(called VTR2 I think) will not display unless something is plugged into it, you will probably need the original factory stereo to get a sound from AV1. Most modern head units have the input plug anyway, with far better sound than the clarion unit, and no need for band expanders.

webng Experienced

webng

Posted
  • Author
Posted
This is just from memory so it could be slightly wrong

push the TV button on the left panel near the bottom

on the screen push the far r/h button to scroll thru something like this

TV(auto) -> TV(manual) -> AV1 -> AV2 -> back to the start

any probs & I'll physically check

good luck!

Looks good! Thanks!

And Collaborator

And

Posted
Posted
correct, but AV2(called VTR2 I think) will not display unless something is plugged into it, you will probably need the original factory stereo to get a sound from AV1. Most modern head units have the input plug anyway, with far better sound than the clarion unit, and no need for band expanders.

Errr... Chook, correct me if I am wrong, but do you mean that we can leave original Xanavi Double DIN unit in place , replace only factory radio (strereo) and connect Xanavi Head unit to it ?

  • 1 month later...
DaveB Mentor

DaveB

Posted
Posted
Errr... Chook, correct me if I am wrong, but do you mean that we can leave original Xanavi Double DIN unit in place , replace only factory radio (strereo) and connect Xanavi Head unit to it ?

That would be interesting... can that be done?

chook Mentor

chook

Posted
Posted

Do you mean that you want to use the AV inputs on the front of the xanavi and play this through an aftermarket headunit ? if someone could pin-out the right wires on the back it should be possible, as well as play cd's on the xanavi. But considering the low price of quality headunits with front inputs these days, it wouldnt be worth the hassle.

DaveB Mentor

DaveB

Posted
Posted (edited)
Do you mean that you want to use the AV inputs on the front of the xanavi and play this through an aftermarket headunit ? if someone could pin-out the right wires on the back it should be possible, as well as play cd's on the xanavi. But considering the low price of quality headunits with front inputs these days, it wouldnt be worth the hassle.

That's true. I thought there might be some use to replacing just the single-DIN radio/headunit, but I guess you would then lose the capability to control the 6-stacker in the boot... best then I guess to either do the TV conversion & take advantage of that LCD display (:(http://www.skylinesaustralia.com/forums/St...Tv-t203961.html) or get rid of it altogether.

Edited by DaveB
DaveB Mentor

DaveB

Posted
Posted

On a related topic, in researching the connections on the back of the Xanavi centre-console unit itself, someone somewhere posted a pic' of the rear of the centre console Xanavi cluster on here a while back... does anyone have a link to it as I can't find it in a few different searches?

chook Mentor

chook

Posted
Posted

A stacker can't compare with an mp3-dvd head unit, not to mention the sound improvement over the factory head unit. Got rid of mine as soon as possible.

Dont know where that pic is, there are quite a few dozen wires going into back of the xanavi, did you want to compare the air-con connections ?

DaveB Mentor

DaveB

Posted
Posted
A stacker can't compare with an mp3-dvd head unit, not to mention the sound improvement over the factory head unit. Got rid of mine as soon as possible.

Dont know where that pic is, there are quite a few dozen wires going into back of the xanavi, did you want to compare the air-con connections ?

Actually I mainly wanted to know if the brackets for the Xanavi were the same as for the 3-DIN setup with the stand-alone climate control unit or if they were different. These are the brackets I mean (not sure if these are standard or Xanavi):

post-32445-1203184738_thumb.jpg

mike40sydney Experienced

mike40sydney

Posted
Posted
Actually I mainly wanted to know if the brackets for the Xanavi were the same as for the 3-DIN setup with the stand-alone climate control unit or if they were different. These are the brackets I mean (not sure if these are standard or Xanavi):

post-32445-1203184738_thumb.jpg

brackets are different as the exnavi unit is wider than the stock din size it is ofset to suit the exnavi.the ones u have in pic are 3 din ones.regards mike

DaveB Mentor

DaveB

Posted
Posted
brackets are different as the exnavi unit is wider than the stock din size it is ofset to suit the exnavi.the ones u have in pic are 3 din ones.regards mike

thanks Mike :laugh: I think you predicted early on that I'd end up swapping out my Xanavi

And Collaborator

And

Posted
Posted
A stacker can't compare with an mp3-dvd head unit, not to mention the sound improvement over the factory head unit. Got rid of mine as soon as possible.

Dont know where that pic is, there are quite a few dozen wires going into back of the xanavi, did you want to compare the air-con connections ?

Ah, I am afraid, it's time for me to clarify something. What does actually Xanavi unit do ? Or, I think I'd better put it that way, where is the amplifier located (if you can call that thing "an amplifier") ? Does Xanavi have an built-in amplifier or single din stereo does the job ?

Basically, what I want to get, it's quite simple - I want to keep Xanavi unit and use it's LCD screen to play movies, use it for climate control system ,etc, but I also want to swap single-din stereo and put something better instead, probably even MP3/dvd player or just a good single-din stereo. I'd also like to keep existing functionality, as volume control, etc on a steering wheel.

Am I asking too much ? :cheers:

chook Mentor

chook

Posted
Posted
Ah, I am afraid, it's time for me to clarify something. What does actually Xanavi unit do ? Or, I think I'd better put it that way, where is the amplifier located (if you can call that thing "an amplifier") ? Does Xanavi have an built-in amplifier or single din stereo does the job ?

Basically, what I want to get, it's quite simple - I want to keep Xanavi unit and use it's LCD screen to play movies, use it for climate control system ,etc, but I also want to swap single-din stereo and put something better instead, probably even MP3/dvd player or just a good single-din stereo. I'd also like to keep existing functionality, as volume control, etc on a steering wheel.

Am I asking too much ? :cheers:

No amplifier, just a screen, aftermarket single din stereo will be a good upgrade. You will lose the ability to play CD's on the Xanavi and you might lose the functionality of the steering volume unless you are talentled with electronics and can integrate it with your aftermarket one somehow.

And Collaborator

And

Posted
Posted
No amplifier, just a screen, aftermarket single din stereo will be a good upgrade. You will lose the ability to play CD's on the Xanavi and you might lose the functionality of the steering volume unless you are talentled with electronics and can integrate it with your aftermarket one somehow.

Losing an ability to play CDs on the Xanavi is not a big deal as a single din stereo will do the job, but I'd like to keep functionality on a steering weel. Ahhhrrr :cheers:

Just wonder if anyone managed to connect an aftermarket stereo and keep that functionality at the same time ?

chook Mentor

chook

Posted
Posted
Losing an ability to play CDs on the Xanavi is not a big deal as a single din stereo will do the job, but I'd like to keep functionality on a steering weel. Ahhhrrr :teehee:

Just wonder if anyone managed to connect an aftermarket stereo and keep that functionality at the same time ?

Reference on the ALPINE site. scroll down to ' Steering remote ready ', talks about using the factory steering buttons. http://www.alpine.com.au/support/glossary.asp

Is the head unit clarion ? Could be compatable with an aftermarket Clarion ?

Either way, if you talk to the right car sound people (not JB), it is highly likely you can keep them working.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • Murray_Calavera
      R33 persistent issues. P/steering and lag/misfire

      By Murray_Calavera · Posted

      There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...