Jump to content
SAU Community

Recommended Posts

Specs of Engine build

Mahle Pistons

Greddy oil pump

eagle rods

R33 Crank Grubbed screwed

Tomei buckets & springs

Nitto Vavles

Tomei Cams 280 by 10.5mm Lift

Ported head

N1 Block

Trust Manifold

Hypertune plenum

700cc injectors Maybe going bigger if needed

280 with 10.5 lift!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

damn man.

post up a video of this thing at idle and on the track.

that is pretty aggressive.

IM IMPRESSED.

must have taken ages and a fair bit of dosh to pull off.

congrats

Well yep for a while till i can affort a buz box to get me from work to home. Not cheap rebuilding a strong GTR

I said that to myself many years ago when i got my gtr. also dog box, and fairly decent power.

i've only just now gone out and got myself a daily driver. tho for about 9 months i also had a old 4wd

get the little buz box now! trust me!!

tho there aint nothing like a dog box!

I said that to myself many years ago when i got my gtr. also dog box, and fairly decent power.

i've only just now gone out and got myself a daily driver. tho for about 9 months i also had a old 4wd

get the little buz box now! trust me!!

tho there aint nothing like a dog box!

Ah great looks like im going to have fun driving it home from sydney to newy lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...