Jump to content
SAU Community

Gtr Wont Start?

j_casey87

By j_casey87,
in Engines & Forced Induction

 Share

Recommended Posts

j_casey87 Contributor

j_casey87

Posted
Posted

hi guys went to start the 32 yesterday and all that it was doing is the starter solioind was clicking thats bout it i checked the batt and even used a next door neighbours ford battery to try and jump but same problem im going out now to give the starter a bit of a bash and check the fuses but i dont think that will

help i think its an electrical problem cause when you turn it to start all the warning lights flicker and the hicas makes a weird gurgling noise as opposed to the usual fuel pump soud it has any help would be greatly appreciated

cheers josh

Link to comment
https://www.sau.com.au/forums/topic/199975-gtr-wont-start/
Share on other sites
cheez Mentor

cheez

Posted
Posted

another thing is check that the battery terminals are secure and tight. sometimes they make enough contact for a while then the wriggle a little the last time u drove it and now dont have the contact to draw the needed power from the battery

Link to comment
https://www.sau.com.au/forums/topic/199975-gtr-wont-start/#findComment-3560966
Share on other sites
j_casey87 Contributor

j_casey87

Posted
  • Author
Posted

yeah it has fuel it dosent crank over it is only the starter solionid clicking and battery terminals are secure but i need to do get a battery charger or a new battery i left the door a little bit open last night after working on it and its dead,and i checked all fuses this morn as well and there fine i think it has something to do with the thermos i wired up but i took the positive wire off the battery and only left the earth connected to the relay and it still did it so then i unplugged the relays and tried again and it still did it,also i turned the motor over buy hand to make sure it wasent seized or the starter wasent seized

Link to comment
https://www.sau.com.au/forums/topic/199975-gtr-wont-start/#findComment-3560977
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • MBS206
      NC MX5

      By MBS206 · Posted

      I hear that would involve some nice country road drives into the hills for Mark...
    • MBS206
      Recommendation for engine oil funnel spill free

      By MBS206 · Posted

      I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • EndZee
      Fuel Pump Control Module & Dropping Resistor

      By EndZee · Posted

      Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • Duncan
      M35 Brake caliper replacement

      By Duncan · Posted

      You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
×
×
  • Create New...