Dropping A Afm

[ahh 33 s2]

i have been having problems with my z32afm for a while now. i remembered that i droped it from standing hieght before i got it installed. would this break it. it hits 5115v on the pfc hand controller putting out 250rwhp and on .8 bar. its been tuned twice with this afm on and niether shop have said anything. the car runs really rich and isnt making as much power as i would hope for with me supporting mods

which are

fmic

hks dump

nismo cat back

splitfire coils

fuel pump

pfc

avcr

stock turbo at a bar when being tuned

k&n pod

i thought for a bit i had a dodgy ebay afm. but i just checked the serial numbers which match ones that paulr33 has on one of his fact pages. i am willing to buy new one just want to check if its nessacary first. or should i ask a tuning shop as well. but that would mean dyno time which means $$

any opinions or help would be appreciated

thanks dan

[Adriano]

If its running really rich, then its in the tune, not an AFM problem, although the rich tune can easily be reducing the power the car makes. I would have thought 250rwhp is about right for a stock turbo running .8 bar

Edited January 5, 2008 by Adriano

[ahh 33 s2]

yeh but would a bad tune explain why its maxing out??? thats what im asking coz isnt a z32 good for around 450hp or more and a stock turbo would be pulling in that much air to eplain the maxing out

[Simon-S14]

dropping it certainly aint good, why not try borring another z32 afm and see if the problem is still the same or not

[ahh 33 s2]

dont no any one else with one or would have tried that already all my skyline mates dont put a cent into there cars

[Adriano]

Try getting a mate with a z32 lol

[GeeTR]

lOl

[Munkyb0y]

why do you need a z32 afm for anyway? surely the r33 afm will handle the airflow from a stock turbo. should be good for at least 300rwhp or soemthing.