Jump to content
SAU Community

Recommended Posts

hey guys getting ready to take my car to the drags soon,ive never really dropped my car on the brake before so i did it last night and my car dusnt like it much, it wouldnt do a smooth burnout like my r33 did,it just shook the shit out of my gear box and diff,is there any thing i can do to stop this????,

Link to comment
https://www.sau.com.au/forums/topic/200383-burnout-to-warm-up-tyres/
Share on other sites

yeh depends, do u have the stock suspension? if not you should change so some stiffer IRS stabilizers? drift pinaples, i had the same problem with my ss so i changed to some pedders IRS rubbers, also some stiffer suspension will help, if you already have this maybe it is just a case off letting the clutch go at a diffrent rpm range

yeh depends, do u have the stock suspension? if not you should change so some stiffer IRS stabilizers? drift pinaples, i had the same problem with my ss so i changed to some pedders IRS rubbers, also some stiffer suspension will help, if you already have this maybe it is just a case off letting the clutch go at a diffrent rpm range

yeh i got bilstein coilovers all round,other than that stock,

"drift of the mark" lol

possibly look at your technique

how hard are you hitting the break?

do you heal toe or use both your feet?

what kind of road are you trying it on?

what tyres do you have?

try dropping the clutch at different rpms

then again your clutch could be slipping or something might be loose on your drivetrain?

could be a number of things.. what car do you have btw?

???

i meant it dusnt do it when i just spin the wheels tryn to launch of the spot,it just wont let me sit on the brake smoothly with out bouncing around and making a banging noise,

Edited by flake32
"drift of the mark" lol

possibly look at your technique

how hard are you hitting the break?

do you heal toe or use both your feet?

what kind of road are you trying it on?

what tyres do you have?

try dropping the clutch at different rpms

then again your clutch could be slipping or something might be loose on your drivetrain?

could be a number of things.. what car do you have btw?

r32 dude,i heel-toe,i know how to do a burnout,something just dusnt feel quite right,

gonna try my stockies on the rear as i have 18inch koning rims and they are extremely heavy they also have very grippy tyres on them,

Edited by flake32
theres a rubber stabilizer where the diff mounts to the body if that is perished it will probally be cause the diff to bounce a round, so is it everytime you do a burnout it happens when u first put it on the brake?

yeh its when i make it sit on the spot spinning the wheels, its more the diff that bounces around than the gearbox,gonna put it on a hoist sum time during the week and have a better look,cheers,

Studs being the top and bottom shock mounts?

the two studs at the top are broken,clean sheared off,not sure whether to get them fixd or buy new coilovers,probly get new ones,

Edited by flake32
*sigh*

was there really a need for that?

The Active LSD is annoying, you can feel it flicking between wheels alot :P

that's what i was going to suggest, mine used to do it like crazy, although mine had solid aluminium subframe bushes that made it worse.

the two studs at the top are broken,clean sheared off,not sure whether to get them fixd or buy new coilovers,probly get new ones,

lucky you discovered it before it was too late...

if it's anything like most coilovers, its just two studs pushed into the top hat, so you should be able to replace them cheaply. :D

my old car never had a problem grabbing 2nd

sometimes with a crappy dump of the clutch it shook the whole dash etc, but more revs solved that.

get up on high revs and then play with it on the brake. should be smooth when your stabbing the gas while on the brake, leaving a nice set of strips up some road :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...