Jump to content
SAU Community

My Custom Long Split Dumps For Gtr

femno

By femno,
in Fabrication

 Share

Recommended Posts

femno Grand Master

femno

Posted
Posted

Just thought it would be good to share with my fellow fabricators my custom long split dumps for my GTR.

Basically i though f**k paying almost a grand for trust extended dump and front kit, ill make my own!

In a nutshell, I started off with some Just Jap stainless dumps, chopped the gates off and extended them, welded up the holes in the main pipes where the gates used to plumb back in.

post-17897-1199712432_thumb.jpg

post-17897-1199710507_thumb.jpg

post-17897-1199711316_thumb.jpg

I bought some stainless 1.5 inch mandrel bends and chopped and used those to make the gates.

post-17897-1199712093_thumb.jpg

Im no expert welder with the mig, but by the end of doing these i wasnt too shabby...(being modest)...thats why i grinded back most of

the welds cos they looked shit haha. My flange weld isnt too bad cos that was the final bit...:cheers:

Did a bit of test fitting with a spare block and head...bloody tight fit it was...

post-17897-1199710753_thumb.jpg

post-17897-1199711793_thumb.jpg

I plan to plumb the gates back into the main pipes when i do my custom dual 3 inch zorst...!

post-17897-1199711005_thumb.jpg

Comments welcome! Dont be too harsh tho. :rofl:

Link to comment
https://www.sau.com.au/forums/topic/200588-my-custom-long-split-dumps-for-gtr/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

brilliant. I was just about to start on exactly this job since they've just change our race regulations to free exhaust systems. We'll run similar setup except keep front and rear turbo exhaust seperate as well - so 4 pipes straight out the side.

the thing that worries me most is clearance putting the motor in since ours comes in and out all the time :cheers: and physical space for the pipes, especially the front one.

what diameter is the wastegate pipe? 1inch?

Beer Baron Grand Master

Beer Baron

Posted
Posted
I bought some stainless 1.5 inch mandrel bends and chopped and used those to make the gates.

Duncannnn! :blush:

nice pipes. never been a big fan of the HKS style dumps as they have 2 pretty small pipes. I'm converted to the big bell mouth dump which lets the gas expand as much as possible as quickly as possible, but yours look like they will work well. :D

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Matt Z
      SAU NSW - Chickos Cruise

      By Matt Z · Posted

      Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • MBS206
      "Cheap" bolt on turbo on RB25DET NEO

      By MBS206 · Posted

      It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • MBS206
      Strange issue RB25DET wont start

      By MBS206 · Posted

      What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...