Jump to content
SAU Community

Recommended Posts

If u wanted to know stuff abt the car

No car has quite the same reputation as Nissan's Skyline GT-R. It's not officially sold in the United States, barely qualifies as compact, and is built with its steering wheel on the wrong side, but the all-wheel-drive, sequentially twin-turbocharged Skyline GT-R has managed to become a legend in America. That the producers of "2 Fast 2 Furious" ("2F2F") recognized that is at least somewhat encouraging--isn't it?

The Skylines used during filming were all R34s, a model introduced way back in 1998. Like other Skylines, the R34 is powered by a RB26DETT 2.6-liter, DOHC, 24-valve straight six sitting longitudinally in the engine bay that's force fed by twin turbos and rated at a laughingly low 280 hp. The R34's engine feeds a six-speed Getrag gearbox that in turn sends power to the ATTESA all-wheel-drive system, which electronically varies the torque split.

Super HICAS four-wheel steering is also aboard and includes an electronic feedback control system to ensure precise wheel positioning under extreme circumstances. But the big change for the R34 from previous Skylines was a stiffened body shell and fresh aerodynamic design. This car has carbon-fiber under-car diffusers and a new rear wing.

In fact, the Skyline R34 is such an effective piece of technology, it was too good for movie work. All-wheel-drive supercars are quick and amazing to drive, but they're absolutely nonchalant about their work. It takes a rear-quarter hit by an out-of-control country squire to get an R34's tail to swing out dramatically, and burnouts are tough in a car with more traction than a Caterpillar D9. So the 2F2F transportation department excised the front driveshaft and disabled the Skyline's four-wheel steering so it could misbehave like a regular car.

For its appearance on camera, the Skyline was encrusted within a C-West body kit, drenched in House of Kolor's platinum pearl paint and treated to a set of 19-inch HRE 446 polished wheels inside Toyo Proxes T1-S tires. Inside, the front passenger seat was ditched in favor of not one, not two, but three nitrous bottles--none of which are actually plumbed into the engine. Also thrown in is a Clarion head unit with LCD TV screen, a big JBL amp and Infinity speakers that actually seem to work. Of course, it also carries a bunch of blue neon and spits blue flame from its exhaust system.

As one of the two cars driven by too-pretty-for-a-guy hero Officer Brian O'Conner (Paul Walker), the Skyline, according to transportation coordinator Ted Moser, has 505 hp on tap and a hoarking 444 lb-ft of torque. In that "2F2F" alternate universe, that means this car rockets to 60 mph in just 4.1 seconds, consumes the quarter-mile in 12.1 seconds and has a top speed of 180 mph. Back on the actual planet Earth, the performance is still strong, but not quite as strong as fresher, intact R34s we've driven.

With Josh Jacquot doing his suave Paul Walker imitation, the Skyline, which is bone stock under the hood, groped its way through the quarter in 14.1 seconds at 101 mph--the third quickest car of the six included in this movie car test. With 22,254 km (13,797 miles) on its odometer, this car wasn't old, but it definitely had been beaten up pretty determinedly. Power output seemed down from other R34s, but a direct comparison is tough since the other R34s had the advantage of all-wheel-drive launches and didn't need a feathery throttle down the track. This car literally smoked its rear tires on every 1-2 upshift, which was cool to watch but certainly added time to each run. Its performance is also sabotaged by its big diameter wheels and the added heft of all the add-ons. The last stock R34 we drove hit 60 mph in just 5.07 seconds and crushed the quarter mile in 13.3 seconds at 103.7 mph.

The lack of AWD and 4WS knocked the movie Skyline's performance to 0.91g on the skidpad, although we expected worse. The missing front differentials made the car much easier to drift, which is of course, the point, and we have to admit the car looked great doing it.

As for the brakes, they remain stock all around, and the ABS is intact. From 60 mph, this car stopped in 127 ft. Again, not a terrible performance, but not exactly what we've come to expect from a Skyline GT-R.

Overall, the Skyline turned out to be one of the better running and better sorted of the six cars. The driver's seat is a Sparco Milano and the additional gauges are HKS products."It's not too bad," Josh reported after his quarter-mile runs. "Now we know how a rear-wheel-drive R34 performs."

2 Fast 2 Furious" Brian O'conner

1999 Nissan Skyline GT-R R34EngineEngine Code: RB26DETTType : In-line six, iron block, aluminum head, twin turbocharged and intercooledInternal Modifications: NoneExternal Modifications: K&N Ram Air system, HKS Titanium Exhaust, Turbonetic IntercoolerEngine Management Mods: NoneDrivetrainLayout: Front engine, all-wheel driveDrivetrain Modifications: Front driveshaft removed, Super HICAS disabledSuspension Front: JIC Magic shocks, Goldline springsRear : JIC Magic shocks, Goldline springsBrakesFront: Stop Tech brakesRear : Stop Tech brakesExteriorWheels: HRE 446Tires: Toyo 275/30ZR-19 (F/R) Performance AccelerationQuarter Mile Time: 14.1 sec.Quarter Mile Speed: 101.0 mph0-30 mph: 2.6 sec.0-60 mph: 6.0 sec.30-50 mph: 2.1 sec.50-70 mph: 2.9 sec.Handling Lateral Grip (200-ft skidpad): 0.91 gBraking60-0 stopping distance: 127 ft.Interior: Sparco harnesses, MOMO steering wheel, Clarion head unit with LCD TV screen, JBL amp, Infinity speakers

Link to comment
https://www.sau.com.au/forums/topic/200650-2f2f-skyline-r34/
Share on other sites

No car has quite the same reputation as Nissan's Skyline GT-R. It's not officially sold in the United States, barely qualifies as compact, and is built with its steering wheel on the wrong side,

As one of the two cars driven by too-pretty-for-a-guy hero Officer Brian O'Conner (Paul Walker),

:D:D huh? sounds like something a Frenchman would say...are you French? :)

The only good Fast and Furious was the original movie. 2F2F wasnt even about cars and Tokyo Drift was the lamest love story with a mix of Yakooza bullsh|t!

No way Fast and Furious sucked hard 2 Fast 2 Furious was the best, and Tokyo Drift is totally different from the 2nd one but i love the R34 :banana: from the movie.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...