Jump to content
SAU Community

Recommended Posts

I was doing some reading on the Australian Institute of Sport website last night. I was always under the impression that protein was the most important thing for building muscle, but apparently not so.

Straight from the AIS:

Source Link: AIS - Increasing Muscle Mass

Maybe not so relevant for some guys that just think about lifting weights and put on 2kg, but its definitely given me some 'food' ( :P ) for thought.

that would be more for athletes wanting performance (lean muscle gain, where being bulky isn't desired) rather than people wanting to simply bulk up. generally lean athletes (like cyclists) will use a 3:1 carbs to protein ratio as the carbs replenish what they've burnt and the protein helps replenish/rebuild the muscle.

Recently read an article (from earlier this year) that 12 of the brisbane broncos were over 150kg for their max bench, interesting stuff, and very cool to see some of the training techniques the different clubs use.

Anyone else got insight into football training techniques ?

Wonder what sups they use, probably tailored player to player. ?

Recently read an article (from earlier this year) that 12 of the brisbane broncos were over 150kg for their max bench, interesting stuff, and very cool to see some of the training techniques the different clubs use.

Anyone else got insight into football training techniques ?

Wonder what sups they use, probably tailored player to player. ?

be tailored to player, partly based off the position they play i'd say. a big front rower is going to need a drastically different sup regime to a position where they need to do a lot more running (rather than being a large, slow moving object that uses brute force to get past the opposition)

Recently read an article (from earlier this year) that 12 of the brisbane broncos were over 150kg for their max bench, interesting stuff, and very cool to see some of the training techniques the different clubs use.

Anyone else got insight into football training techniques ?

Wonder what sups they use, probably tailored player to player. ?

They tend to be very strong!

Footballers do not seem to do the same kind of strength training.

geelong football club (AFL) use BSC protein with creatine in it ive heard...

and ive seen things of hawthorn football club using chains hanging on each end of the barbell when doing bench press, so that when the bar is low nearly touching ur chest alot of the chains are on the ground, but as you push it higher it lifts more chains making it heavier for the easier part of the bench press...

and ive seen things of hawthorn football club using chains hanging on each end of the barbell when doing bench press, so that when the bar is low nearly touching ur chest alot of the chains are on the ground, but as you push it higher it lifts more chains making it heavier for the easier part of the bench press...

We have them at the gym. The ones we have are either 10 or 15kg at the top of the lift. Its designed to strengthen the triceps.

The "easy" part of the bench varies on the person, I can get it off the chest easily on most lifts but fail a small distance above the chest. :(

geelong football club (AFL) use BSC protein with creatine in it ive heard...

That's more so because of a corporate arrangement more than anything else i would imagine.

I can get a 45% discount @ BSC and their pricing is still more expensive than most other places without the discount. They pretty clearly price it through the roof if they can give such discounts in bulk.

Over-inflated pricing usually exists solely to make the discounts seem attractive to "VIP"s and corporate deals. Any full retail sales are a massive bonus lol.

I deal with the same thing when selling oil to workshops...a lot of customers say their oil supplier gives them 20% discount for loyalty etc. Interesting that new customers get the same discount as those who have been with them for 10 years...

as already mentioned, you can use chains on a lot of lifts to help with the lockout part at the end... also helps you build explosiveness as you drive hard at the start of the lift to get enough momentum to finish it

League totally different training to AFL and Union... no rapid stopping/change of direction, limited jumping, just giant battering rams... bench press is important for them as its all pushing... I bet they do a lot of tyre dragging and prowler work as well... similar to NFL training for the linemen and running backs etc

and they don't cover anywhere near as much ground over the course of a game... the age of the big full forward is pretty much over in the AFL, guys have to be a lot more agile and able to play multiple positions etc...

Barry Hall? close enough?

I'd love to see someone with the height/athleticism of NBA players in the AFL... Dwight Howard would be a sight to see

ps. doing a deadlift based session right before your going to spend the weekend bent over sanding/masking/painting skirting boards is a BAD idea

Aaron Sandilands or Dean Cox could probably pull it off...big Max Gawn when he matures into a decent ruck?

lol yeah don't recommend that at all. After spending the day bent over my engine bay I avoid doing lower back exercises where I can.

Yeah Aaron Sandilands is basically exactly the same height/weight as a Dwight Howard but the athleticism is worlds apart (its coz he's black innit)

7 footers in the NBA move like this these days

ps. Howard is jacked so its still kinda on topic :thumbsup:

Yeah Aaron Sandilands is basically exactly the same height/weight as a Dwight Howard but the athleticism is worlds apart (its coz he's black innit)

7 footers in the NBA move like this these days

ps. Howard is jacked so its still kinda on topic :thumbsup:

I'd agree worlds apart, but not one sportsman necessarily more athletic than the other. Just trained for different sports. Granted the African Americans tend to have a better predisposition for basketball and athletics in general...you have a football field vs a basketball court, foot skills versus hand skills...jumping and short sprints is about the only thing the sports share in common and I don't think either guy would be anywhere as good at the other's sport. That being said, quite a few AFL footballers have come from basket backgrounds and vice versa.

Regardless, dude above has nearly 40kg on me and is more agile lol.

Ok so Bent over barbell rows. Is your back supposed to be parallel with the floor or can you have it at around 45 degrees? I see videos that are done both ways.

Angled is safer/easier on the back and will target traps as well as lats...

I've changed up my pull day a bit now to include a few sets of 40kg Pendlay rows (horizontal, or as close as I can get there) as well as a few sets of 60kg 45 degree rows.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to it's full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so damn hot in there, that made it all the more easy to remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. I was standing there looking at the car and said 'f**k it'. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
    • Also playing with fire if they start to flow more air down low than what the stock twins can. It's not even up top you need to worry, it can be at 3000rpm and part throttle and it's getting way more flow than it should.
    • Any G40/1000 or G40/1250 results out there?  
    • You still want a proper tune on the stock ECU though. Stock tune + stock ECU with GT-SS/-9s is probably playing with fire if you're running more than stock airflow/power.
×
×
  • Create New...