Jump to content
SAU Community

Recommended Posts

Dude really dude?

OMG dude.

you read the 4 lines I wrote and decided to quote that one which started with "My opinion"?

Also, if he didn't care about who much he lifted, why did he post about his gains in strength multiple times?

Yes, yes i did pick the line where you expressed your typical big-headed opinion where you just had to drop in the "doing it wrong" statement, like you're an expert on this topic... hate to get sand up in your vagina too when someone points out how you could be a little less to-the-point :no:

In regards to your second statement about him posting strength gains, he was confirming the typical results of a steroid cycle to answer our curiosity, and I also ASKED for some feedback on that.

Try to be a little more thoughtful with your responses next time Doc.

Recently started taking some Syntec - Ground Zero as a pre-workout.

Tastes delicious and definitely gets you pumped up a bit, haven't tried the more popular ones liked Jack3d so can't really compare as yet.

Beta Alanine kinda shits me a little though, tingles irritate me.

:thumbsup: lifting without the girly 'workout gloves'

People think thats how you avoid calisus but, as you discovered it's easy just to rip them off by lifting heavier ha ha..

An old Navy buddy once told me " gloves are for fags"

.... Not really, principal remains the same :D

Cheers on the comments. Everyone is free to express opinions. Doesn't matter what the topic is, there will always be positive and negative feedback

Now onto pre-workouts. I've used many pre-workouts and have found the best one that worked for me was Jack3d. I've tried non-1,3-Dimethylamylamine products and definitely have to say that it's the stimulant that's doing the job. The problem is you get addicted to it and end up crashing if you miss using it during one of your workouts like I have experienced after using 3 scoops at one stage of Jack3d.

Some people are using it on its own in high doses and are definitely experiencing some unwanted side-effects hence why pre-workouts with DMAA are very small scoops. It's much cheaper buying DMAA on its own. I heard that it's banned or going to be banned in Australia, not sure though. So if your using pure DMAA, beta-alanine and caffeine just be mindful on the doses.

Yep ban is now here, retail stores now being "ordered to clear stock" So if you are into it, i highly recommend to get some.

That said, i still remember Muscletech Acetabolyn i think it was called, was really good, then got recalled. Then acetabolyn II came out.

No doubt Jack 3d will be out again, just will be minus the DMAA, more like an NO Xplode mix.

VspecII i aplaud you for your honestly and sincerity in what can be a controversial issue. Not to say I condone the use of it, but I do appreciate you letting members know your experiences.

Just remember for your benefit these are public forums.

P.S. just read a few articles regarding a lot of aussies going on holiday to Thailand for a "roid holiday" for 6 weeks, the money they save in getting it in Thailand the holiday nearly pays for itself.

Gotta admit (other than the roids) its not a bad idea to spend a holiday, going hard at the gym surrounded by beautiful beaches and cheap shopping and living like a king in beautiful accomodation.

This might be of interest to people here..

So some young lad had access to the equipment necessary to test protein powders - specifically, their claimed amount of protein.

The results are pretty interesting

https://docs.google.com/spreadsheet/lv?key=0Ag9uT-E4EIL7dFZPZnR0WVZybGtFWnRKNzdKNm9XOVE&toomany=true#gid=0

All the samples were sent to him by people - so I guess there is a chance that someone might have contaminated the sample but I don't see why you'd bother.

Anyone taking any pea, egg or BOVINE COLOSTRUM protein? (bulknutrients.com.au)

The reason i ask is because they're lactose/gluten free. The reason Im trying to avoid lactose/gluten is because I feel a lot better not having it.

This might be of interest to people here..

So some young lad had access to the equipment necessary to test protein powders - specifically, their claimed amount of protein.

The results are pretty interesting

https://docs.google....many=true#gid=0

All the samples were sent to him by people - so I guess there is a chance that someone might have contaminated the sample but I don't see why you'd bother.

Interesting stuff. Thanks for posting. The only one I've used in that list is Optimum's Gold std 100% whey. Seemed good enough, but was pretty expensive.

Optimum always seem to be the most regularly sold protein and i guess those results confirm why. Still is a little off from what they advertise but good to see some of their products near the top of the ladder, still as mentioned there is a lot of testing control gone astray in those results but interesting nevertheless.

Bodybuilding.com has had optimum as its number 1 protein for yonks now: http://www.bodybuilding.com/store/opt/whey.html

Does anyone ever get headaches / hangover feeling from certain proteins or supplements? My favourite brand of all-in-one supplement has changed something about their mixture (hadn't ordered from them for nearly 2 years) - this one smells kind of fishy and clumps up a bit more than the previous mixture, despite the breakdown label and taste being much the same. In the first week of using it I had some slight headaches on and off, but could just be coincidence, I might have had a bug for that week.

Does anyone ever get headaches / hangover feeling from certain proteins or supplements? My favourite brand of all-in-one supplement has changed something about their mixture (hadn't ordered from them for nearly 2 years) - this one smells kind of fishy and clumps up a bit more than the previous mixture, despite the breakdown label and taste being much the same. In the first week of using it I had some slight headaches on and off, but could just be coincidence, I might have had a bug for that week.

I have experienced similar thing (headaches/nausea) but it was caused from urea level being too high from not drinking enough water.

Cell Tech creatine used to do that too me, i would place it down to your body maybe adjusting to it? but if its the same brand then that is strange. Did you say all the values etc are the same? does it contain creatine?

Bit of a different way of looking it at, but how is work? Have you had in recent changes that could cause stress or anxiety? Also irons levels checked lately?

You will be surprised what stress and anxiety can do....

Everything else is static (I live a fairly OCD life), I can't really put it down to anything else but a bug or the protein. It does contain creatine, both versions did. The values are the same maybe +/- 5% variation. There are a couple of new ingredients to the new one, but nothing that stood out to me as a possible determinant, will post them if you think that helps. Will see how I go with it this week.

Everything else is static (I live a fairly OCD life), I can't really put it down to anything else but a bug or the protein. It does contain creatine, both versions did. The values are the same maybe +/- 5% variation. There are a couple of new ingredients to the new one, but nothing that stood out to me as a possible determinant, will post them if you think that helps. Will see how I go with it this week.

Whatever dude, stop making excuses for being fat.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
    • shit boxes, kids, and daily drivers are all welcome
    • Cam seals go hard. It's a very old car.
×
×
  • Create New...