Jump to content
SAU Community

Recommended Posts

All I hear is whinging about techniques and width of equipment. At least you can move both your arms and do the friggen exercise. If I could do dips between two shopping trolleys with a couple of retards holding them in place I would.

angry_birds___red___super_high_quality__

yes and yes

an olympic bar is 7', 20kg, bearing collars and takes olympic plates (the big hole ones)

standard bar is the stuff you have.

they also make an olympic ladies bar which is 6' and 15kg. the collars are shorter and the gap between the collars is the same as the 7' ones.

just incase you want the lady version.

Sell your shit on ebay, add some more money to your funds and get a cage/bar and plates package like this..

http://www.cyber-market.com.au/cyberfit-power-rack-100kg-olympic-weight-flat-bench-p-591.html

More than you'll need for a while.. and you can always buy more plates as needed.

or if you want to retain your plates you could get something like this..

http://www.gymdirect.com.au/item/5-Package-Deal-_-BPR02-Power-Rack-with-high-low-pulley--+-FD3-flat-bench-+-100kg-barbell-dumbell-set-$865/109.htm

Just trying to follow your logic on buying an entire kit if there's an option to just buy a longer standard bar. Doesn't seem like there is any unless the goal is to ultimately move to Olympic gear.

So I have a new attitude towards this shoulder injury. I thought f**k it...I'm gonna come out the other side of this thing with a positive: huge f**k off legs. Time to make up for the years of neglecting legs in favour of upper body.

So until the physio gives me the all clear on upper body movements, I'm gonna smash the shit out of legs 3-4 times a week. This will involve:

Squats

Squats

Leg press

Hamstring curls

Calf raises

Possibly more squats

Legs progress shot from me.

8637151882_1f28bf8731_z.jpg

Congratulations dude, you're my motivation to put some serious size on my legs over the next 8 weeks or so.

Exactly!!!

I can't do chest so have trained legs twice this week. Tonight was shoulders and traps but before that did 10mins on the bike as warm up and then 5 sets of squats.

Want my legs to get heaps bigger and stronger in the next month.

Fark that session felt good. Hamstring curl smashed my hamstrings in a way that deadlifts can't. And it'll be good to balance out legs with some calf work for aesthetics :)

Satisfaction at the end almost makes up for no upper body work during the session. More energy for squats too, which I normally save for the end of the session.

Sounds good Birds. Hope it all goes well for you mate. An old PT mate of mine stuffed a tendon in his wrist (forget the exact injury but basically sheared off the bone I believe) but it was depressing the number of exercises that ruled out. He found ways to use wraps or particular machines to work around it as much as possible until it healed up completely

With legs being such a big muscle group too I think it should help burn the calories up

I've always had decent upper legs, they would be my best body part. Have never had to do too much to them to maintain volume and they respond well for me. Whereas back , shoulders etc I seem to need to work continually to maintain any size. I'm going to focus on the calves a lot more and hope for some sort of development there. apparently for some people it doesn't seem to matter what you do they just wont respond.

Advice/help from those in the know please.

I have a fairly noticeable size difference between legs due to an old knee injury and would like some guidance as to how to even them up. I have full range of movement but the injured knee isn't as stable as my good knee.

My lower body workout currently consist of the following once a week: Walking lunges, Squats (parallel), Deadlifts, Hamstring curls, calf raises, single leg dead lifts and jumping squats.

Try to do cardio twice a week, HIIT resistance circuit, HIIT on rowing machine/stationary cycle, if I have time XC mountain biking. Also do two upper body days a week, a three day split works best for me so I can keep workouts short after a long day at work. No training Sunday/Monday.

Some people tell me to do single leg exercises and do more reps for the weak leg, others say start with weak leg and only do the same amount of reps for both sides. Other people insist I should keep doing what I’m already doing and just concentrate on driving with the weaker leg more.

I train for general health and to blow off steam after a 13+ hr shifts.

I do need to have a reco at some point but time, money and rehab process put me off the idea while it mostly works ok.

If anyone can help me out that would be great as it's really starting to shit me.

EDIT: I just worked it out MORE SQUATS!

Edited by numleg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Wiring the car up today so will report back for anyone else that searches this in future.
    • The light comes on from low oil pressure. Not temp. Did you do a rebuild or just add an ecu etc?  What oil are you using and where are you getting the pressure reading from
    • So like the title says my 97 rs4v has a oil temp sensor but no triple gauges as it was originally factory navigation. My current setup is not using the factory oil pressure sensor as I'm running a link ecu and a real sensor.  I did leave the oil temp sensor in. So now as I was working on first start up and bleeding coolant I get the oil light on the dash faintly as the oil temp gets to about 60-70c. Oil pressure is 45psi at idle at the same time.  I'm wondering if the temp sender doing this?  
    • Well it runs again!  This was a definite case of while I have it apart lol Everything except the body and interior has been restored, refinished, or replaced.  @socal_stagea is my IG if you're bored and want to see all the pics.
    • I already got plug and play Link ecu G4X. Main concern is that the de loom works on s1 motor or not? I already rewired injector and coils loom to suit my bosch injectors and bosch vag coil. I’m not running any Iacv. For cas running the nz wiring kit i bought the neo plug one so it suits the wiring but don’t know it works or it doesn’t matter they work the same on every motor. For wastegate solenoid do i need to wire straight from ecu? What can i do for iat sensor to work or same run from ecu? For Vct solenoid, right now i got s1 vct solenoid on motor so do i need to remove neo connector and add s1 connector to work? Any other thing i missed i need to do to make the motor working on de loom. Any different mechanism on neo vs s1?
×
×
  • Create New...