Jump to content
SAU Community

Recommended Posts

I should consider myself lucky, then, as my gym has about 10 ABC bars and 3-4 IronEdge Economy bars. The IronEdge are newer bars and the bearings seem to be more freespinning, but I still prefer the ABCs. Neither has ever seen a bend, though to be fair, I haven't seen anyone deadlift more than around 250 at my gym. Half of our gym is dedicated to free weights, the other half is Nautilus and crossfit.

Not bad for a Genesis! I think it helps that it was an existing gym before Genesis bought it out. But to be fair, our latest gym manager is an ex sprinter / lifter and we've had some good strength training upgrades since. We now have a chalk bowl, which was his response to people leaving blocks of chalk everywhere, instead of just banning chalk or warning the members using it. We also have almost monthly lifting comps.

Cheap Chinese bars bend with 200kg. I was given 5-6 of them for free, all gone.

Our squat bars are good for 600kg, 35mm diameter, made in Finland, $1000

Our Eleiko bars are the best in the world, have 3 of them, $2000 each

Our deadlift bars can handle anything anyone can deadlift, the biggest dead of all was done on a Texas bar, we have 4 at $1000 each

Best local bar is ABC, hands down, cost $600, we have a dozen of them.

In the 6 years we have been open we have not bent a bar I bought, only the $180 Chinese bars I was given, hence why they are now at 2 local football clubs

Very few commercial gyms will even buy ABC bars, just Chinese ones

Your mate should go to Musclepit or PTC Leesh, they encourage 1RM's

I suggested PTC; a bit of a drive (2hrs) for him every night unfortunately... :(

Your gym sounds pretty good Birds

I reckon it is. Minor things annoy me but rarely will a gym be perfect for what you want and by the sounds of it I have things better than most.

For the first time lastnight, I had someone approach me about my deadlift form. He's a membership consultant there and he approached me saying "I...I gotta say something man", shaking his head a bit. I said "What?". He says "You're going to end up injuring yourself, your back is arching when you deadlift." I was doing 170kg for reps, so I explained to him that when you're pushing close to your max effort, form will never be perfect. He says "So you don't think form is important?". I reply "No, don't put words in my mouth; form is very important, but if your form is absolutely 100% when lifting with maximum exertion, it likely is not your max effort. I've never had an injury from deadlifts and I could show you an 82kg lifter who can pull 290kg without injury and his form won't be "perfect". I appreciate your concern, but I disagree with your logic". He said "Alright, I'll leave it be, but..." and laughed to himself.

Next minute he's doing some cable exercise and I hear him complaining to his training partner about his back hurting..,wtf? Should have told him to lift the 170kg I doubt he could have even done one of them lol

I've been using beta-alanine/taurine/creatine daily for a few weeks now prior to training. Is this safe to use daily, or should I stop taking it for a month then go back on it? I've tried looking it up and bodybuilding.com said 'a 4-9 week on/off cycle should allow you to consistently reap the performance benefits of beta-alanine' but I don't really understand what that means. I take it for 4 to 9 weeks then I go off it for 4 to 9 weeks?

Markos: Spoke to a mate of mine down your way, he said he's happy to collect those weights for me when he's coming up for the next DECA (I'm not sure when that is yet) so I'll let you know, cheers.

I did some strongman training with a mate who does that / powerlifting on the weekend - the whole tyre flipping, keg pressing, stone moving sled pulling type routine. it was good fun apart from showing up a lack of conditioning on my part!

Also managed to do a PB of 170x2 deadlifts during the same session! It helped a lot being shown how to position my feet properly and keeping my arms closer in to my body.

as if not have hyphy mud as a pre trainer!

I reckon it is. Minor things annoy me but rarely will a gym be perfect for what you want and by the sounds of it I have things better than most.

For the first time lastnight, I had someone approach me about my deadlift form. He's a membership consultant there and he approached me saying "I...I gotta say something man", shaking his head a bit. I said "What?". He says "You're going to end up injuring yourself, your back is arching when you deadlift." I was doing 170kg for reps, so I explained to him that when you're pushing close to your max effort, form will never be perfect. He says "So you don't think form is important?". I reply "No, don't put words in my mouth; form is very important, but if your form is absolutely 100% when lifting with maximum exertion, it likely is not your max effort. I've never had an injury from deadlifts and I could show you an 82kg lifter who can pull 290kg without injury and his form won't be "perfect". I appreciate your concern, but I disagree with your logic". He said "Alright, I'll leave it be, but..." and laughed to himself.

Next minute he's doing some cable exercise and I hear him complaining to his training partner about his back hurting..,wtf? Should have told him to lift the 170kg I doubt he could have even done one of them lol

I'm assuming if you're doing 170 for reps then it's not really close to your max effort. Maybe that was his point?

Either way, people need to learn to stfu and pull their heads in.

I don't want to get in the way of you 2 love birds but i just take it after a workout. Seems to help with fatigued

We're not lovebirds.

I was told to take it 30 minutes before training.

My question which apparently I need to rephrase is: do I need to cycle off the supplements at all or are they safe to consume every time I train? (3x a week)

My understanding is beta alanine and taurine would be fine to use at that frequency indefinitely. REAL stimulants such as caffeine/DMAE/DMAA/clen/ephedrine etc etc do need to be cycled, due to your body building a tolerance to them as well as the fact they aren't really doing your body all that much good.

This is broscience mind you.

Same deal.

My justification is that all 3 of these things are already present in the human body (not to mention you'd be getting them from just eating normal food). Creatine would be even more fine for you to use, since you're not getting any in through red meat etc as the rest of us would be.

Same deal.

My justification is that all 3 of these things are already present in the human body (not to mention you'd be getting them from just eating normal food). Creatine would be even more fine for you to use, since you're not getting any in through red meat etc as the rest of us would be.

This is the reason I'm taking creatine, same as beta-alanine:

Vegetarians do not derive beta alanine from their diet. Muscle carnosine concentrations are significantly lower in vegetarians than in muscles of people who consume meat.

I have done research into these supplements and there is a reason why I am taking them. I'm just struggling to find information about cycling on and off these supplements; however due to your comments Troy I will continue to use them 3 times a week.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...