Jump to content
SAU Community

Recommended Posts

Fair enough, it's still quite good numbers really. And 116 for ~7 reps is fantastic. That'd be around 130kg 1RM.

Id agree with jangles, its defs bigger then 130kg 1RM.

Im close (give me 3 weeks) to a 1rm bench of 130kg and i could maybe do like 3 reps at 115kg.

Either way its solid benching!

And actually have a somewhat concerning pain on the top of my patella....like the ligament is trying to tear itself away from the bone. Not doing any more squats today. This f**ks me off big time.

well to put it into perspective, I do 142.5 x8x3, when I did 1RM, because I had no idea what I could do, I did 180 which was easy, then 200, at which point I didn't want to push it any harder in case my knees gave out.

I've found that curling the toes to stop leaning forward and using the hips / glutes to come back up and concentrating on that has helped a lot with any knee soreness that I've had, that said I always err on the side of caution when something does not feel right.

Yo Troy man, was Googling up on my frequently cracking knees (when I get up from a seated or lying position)...saw this article, which talks about something similar to what you may be experiencing with squats.

http://blogs.menshealth.com/muscle-guy/is-it-bad-that-my-knees-crack-when-i-squat/2011/

Now some folks will notice a grinding noise in the knee joint when they squat. If its not painful, its categorized as benign creptius which, again. is nothing to be concerned about. Many people experience this throughout their lives and never have any problems.

If the condition is painful, then thats a different story entirely. The undersurface of your kneecap (patella) can rub unevenly on the front of your thigh bone (femur). This causes the cartilage on the undersurface of the kneecap, and on the front of the thigh bone, to soften and eventually wear off so that it hangs in strands of what looks like loose crab meat. This loose cartilage can irritate the surrounding soft-tissues of the knee joint, and result in pain in the front of the knee with squatting, stair climbing, or even just sitting with your knee bent for an extended period of time.

If this is the case, physical therapy, or in worst cases, surgery, will be required to resolve the condition to allow you to return to normal activities.

This causes the cartilage on the undersurface of the kneecap, and on the front of the thigh bone, to soften and eventually wear off so that it hangs in strands of what looks like loose crab meat.

I have before and after pictures of this from my surgery.

I can put them up here for peoples viewing pleasure in about a month if you want.

Now some folks will notice a grinding noise in the knee joint when they squat. If its not painful, its categorized as benign creptius which, again. is nothing to be concerned about. Many people experience this throughout their lives and never have any problems.

If it's any help my good knee does this a lot.

My physio said it shouldn't be a problem unless there is pain and suggested that I do itb releases on the foam roller twice a day for a few weeks and see if it goes away.

Edited by r31slpr

My pain is definitely not on the inside of my knee so to speak. It's on the outside edge where you'd expect your various quad ligaments to be attached to the patella. Can trigger the pain by firmly pressing/rubbing the area of the bone. It's exactly like I just banged my knee on the corner of a desk or something (or the head stem of a pushbike, as I've done countless times before)

Pain has zero - I repeat - ZERO to do with any muscles (though I won't discount they're somehow the cause). The pain is ON THE BONE. On the TOP EDGE of my patella (when standing upright). In case nobody here knows what your patella actually is (which I know isn't the case, but you're trying hard to prove otherwise lol), it's your KNEE CAP. Yes, the bone. My pain is ON THE BONE.

  • Like 1

The liquid chalk that I made up a while ago has worked extremely well.

One block of chalk and 385ml of isopropyl alcohol made up 2 x 200ml bottles, total cost was around $15, $5 for the chalk and $10 for the alcohol.

Same stuff sells for $20 to $30 for around 50ml on fleabay.

Crushed the chalk to dust by hand in a large zip lock bag, added the alco and mixed it by mashing it up in the bag.

To fill the bottles I cut the corner off one side of the bag and squeezed it into the bottle (got this by watching my missus ice a cake).

If your gym hates on chalk (and there is no alternative) then this could save you some bucks.

I actually put this on first up when I get to the gym, I put it on and grab the bar and it leaves a nice layer of chalk on the bar to start with, I only need to use dry chalk every so often then as it seems to stick better to my hands, probably the alco initially imbedding it into the pores of my hands.

Pain has zero - I repeat - ZERO to do with any muscles (though I won't discount they're somehow the cause). The pain is ON THE BONE. On the TOP EDGE of my patella (when standing upright). In case nobody here knows what your patella actually is (which I know isn't the case, but you're trying hard to prove otherwise lol), it's your KNEE CAP. Yes, the bone. My pain is ON THE BONE.

Nice use of caps lock. But i doubt highly THE BONE is causing pain. Unless you've hit it and bruised it.

tight quads MUSCLES AND LIGAMENTS pull on the patella BONE.

Pretty much any ache or pain in the body will be from muscles, tendons and ligaments.

Or unless I have (mild) patella tendonitis.

I'm sorry though, I just can't see how anything I said could point to muscle. I wouldn't be whinging if it was muscular, since then I'd at least know where the issue was.

Or unless I have (mild) patella tendonitis.I'm sorry though, I just can't see how anything I said could point to muscle. I wouldn't be whinging if it was muscular, since then I'd at least know where the issue was.

you do know that Itis means inflammation and tendon means the tendon, so patella tendonitis would be inflammation of the patella tendon.

Tendons attach the muscle to the bone....

Pain isn't always direct.

Yes I know "itis" more or less means the inflammation of. Regardless, the pain is where the tendon attaches to the bone, as confirmed by jamming my knuckle into the area of pain. Also everything I found regarding people experiencing pain in the same area or general information pages further suggest patella tendonitis.

I've had this same pain before from ramping up weight on leg press too quickly.

And yes I know the site/location of pain isn't always where the cause is - it could be from tight quads or something. The pain is on the edge of the bone, that I'm absolutely 100000000% certain of.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
    • Hi All, putting the engine back together and everything is perfect except have this plug left over.. any ideas what it is for and where it goes? Is on cold side under the intake plenum *note not a stock plug, as everything has been modified Cheers
×
×
  • Create New...