Jump to content
SAU Community

Recommended Posts

Fair enough, it's still quite good numbers really. And 116 for ~7 reps is fantastic. That'd be around 130kg 1RM.

Id agree with jangles, its defs bigger then 130kg 1RM.

Im close (give me 3 weeks) to a 1rm bench of 130kg and i could maybe do like 3 reps at 115kg.

Either way its solid benching!

And actually have a somewhat concerning pain on the top of my patella....like the ligament is trying to tear itself away from the bone. Not doing any more squats today. This f**ks me off big time.

well to put it into perspective, I do 142.5 x8x3, when I did 1RM, because I had no idea what I could do, I did 180 which was easy, then 200, at which point I didn't want to push it any harder in case my knees gave out.

I've found that curling the toes to stop leaning forward and using the hips / glutes to come back up and concentrating on that has helped a lot with any knee soreness that I've had, that said I always err on the side of caution when something does not feel right.

Yo Troy man, was Googling up on my frequently cracking knees (when I get up from a seated or lying position)...saw this article, which talks about something similar to what you may be experiencing with squats.

http://blogs.menshealth.com/muscle-guy/is-it-bad-that-my-knees-crack-when-i-squat/2011/

Now some folks will notice a grinding noise in the knee joint when they squat. If its not painful, its categorized as benign creptius which, again. is nothing to be concerned about. Many people experience this throughout their lives and never have any problems.

If the condition is painful, then thats a different story entirely. The undersurface of your kneecap (patella) can rub unevenly on the front of your thigh bone (femur). This causes the cartilage on the undersurface of the kneecap, and on the front of the thigh bone, to soften and eventually wear off so that it hangs in strands of what looks like loose crab meat. This loose cartilage can irritate the surrounding soft-tissues of the knee joint, and result in pain in the front of the knee with squatting, stair climbing, or even just sitting with your knee bent for an extended period of time.

If this is the case, physical therapy, or in worst cases, surgery, will be required to resolve the condition to allow you to return to normal activities.

This causes the cartilage on the undersurface of the kneecap, and on the front of the thigh bone, to soften and eventually wear off so that it hangs in strands of what looks like loose crab meat.

I have before and after pictures of this from my surgery.

I can put them up here for peoples viewing pleasure in about a month if you want.

Now some folks will notice a grinding noise in the knee joint when they squat. If its not painful, its categorized as benign creptius which, again. is nothing to be concerned about. Many people experience this throughout their lives and never have any problems.

If it's any help my good knee does this a lot.

My physio said it shouldn't be a problem unless there is pain and suggested that I do itb releases on the foam roller twice a day for a few weeks and see if it goes away.

Edited by r31slpr

My pain is definitely not on the inside of my knee so to speak. It's on the outside edge where you'd expect your various quad ligaments to be attached to the patella. Can trigger the pain by firmly pressing/rubbing the area of the bone. It's exactly like I just banged my knee on the corner of a desk or something (or the head stem of a pushbike, as I've done countless times before)

Pain has zero - I repeat - ZERO to do with any muscles (though I won't discount they're somehow the cause). The pain is ON THE BONE. On the TOP EDGE of my patella (when standing upright). In case nobody here knows what your patella actually is (which I know isn't the case, but you're trying hard to prove otherwise lol), it's your KNEE CAP. Yes, the bone. My pain is ON THE BONE.

  • Like 1

The liquid chalk that I made up a while ago has worked extremely well.

One block of chalk and 385ml of isopropyl alcohol made up 2 x 200ml bottles, total cost was around $15, $5 for the chalk and $10 for the alcohol.

Same stuff sells for $20 to $30 for around 50ml on fleabay.

Crushed the chalk to dust by hand in a large zip lock bag, added the alco and mixed it by mashing it up in the bag.

To fill the bottles I cut the corner off one side of the bag and squeezed it into the bottle (got this by watching my missus ice a cake).

If your gym hates on chalk (and there is no alternative) then this could save you some bucks.

I actually put this on first up when I get to the gym, I put it on and grab the bar and it leaves a nice layer of chalk on the bar to start with, I only need to use dry chalk every so often then as it seems to stick better to my hands, probably the alco initially imbedding it into the pores of my hands.

Pain has zero - I repeat - ZERO to do with any muscles (though I won't discount they're somehow the cause). The pain is ON THE BONE. On the TOP EDGE of my patella (when standing upright). In case nobody here knows what your patella actually is (which I know isn't the case, but you're trying hard to prove otherwise lol), it's your KNEE CAP. Yes, the bone. My pain is ON THE BONE.

Nice use of caps lock. But i doubt highly THE BONE is causing pain. Unless you've hit it and bruised it.

tight quads MUSCLES AND LIGAMENTS pull on the patella BONE.

Pretty much any ache or pain in the body will be from muscles, tendons and ligaments.

Or unless I have (mild) patella tendonitis.

I'm sorry though, I just can't see how anything I said could point to muscle. I wouldn't be whinging if it was muscular, since then I'd at least know where the issue was.

Or unless I have (mild) patella tendonitis.I'm sorry though, I just can't see how anything I said could point to muscle. I wouldn't be whinging if it was muscular, since then I'd at least know where the issue was.

you do know that Itis means inflammation and tendon means the tendon, so patella tendonitis would be inflammation of the patella tendon.

Tendons attach the muscle to the bone....

Pain isn't always direct.

Yes I know "itis" more or less means the inflammation of. Regardless, the pain is where the tendon attaches to the bone, as confirmed by jamming my knuckle into the area of pain. Also everything I found regarding people experiencing pain in the same area or general information pages further suggest patella tendonitis.

I've had this same pain before from ramping up weight on leg press too quickly.

And yes I know the site/location of pain isn't always where the cause is - it could be from tight quads or something. The pain is on the edge of the bone, that I'm absolutely 100000000% certain of.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...