Jump to content
SAU Community

Recommended Posts

Tried to crack the 500# the other night, pissed that I almost got it but missed.



Then did some reading of this excellent article and realised how I'm setting up with my hips too low, which is highly inefficient. Have a read, it makes good sense.

Why your Deadlift Setup is Wrong
http://www.powerliftingtowin.com/powerlifting-technique-deadlift-setup/

> Bar over mid-foot
> Hips high enough that arms make a 90 degree angle with your lats (well, the direction the lats are pulling, anyway) which permits proper lat engagement and reduces unnecessary "moment" of leverage, also reduces distance between bar and hips which decreases energy required to lift (bar will track a straighter path).
> Bar slightly behind shoulders

Thanks fellas. 220 is my max, at 85.5kg.

Made some adjustments to my setup based on that article and I found the lift went much smoother, it felt more efficient with a higher hip starting point.

Mkn, I guess that just means you need to work up to it again slowly. Going for a DL PB there's always some psychology in it, but for me it's nothing like the squat. Going heavy on squats is really based on confidence I find.

I love my 1.25 plates, every so often go for new PB and have a win, I dispise not making a lift, my next attempt at some PB's will be in 6 weeks.

I feel for me getting a 1.25 or 2.5 PB's every couple of months is better then going to heavy and risk injury or failure.

My last PB was the 90 clean and press, training weight for 6 to 8 weeks then go for 92.5.

Have I said I hate missing lifts.

  • Like 1

You've also got a point Mark, I was just sort of joshing. If you take a leaf out of Jim Wendler's book, then one should try and steer clear of ego-lifting. And programs like 5/3/1 encourage the achievement of PBs no matter how slight, and the progression of weight from week to week or cycle to cycle, in small denominations. I just hate standing next to the barbell trying to calculate in my head what plates I need to give me the exact total I want, then having to pull about 2 or 3 off each side for the next set to reconfigure them for another odd numbered total.

You've also got a point Mark, I was just sort of joshing. If you take a leaf out of Jim Wendler's book, then one should try and steer clear of ego-lifting. And programs like 5/3/1 encourage the achievement of PBs no matter how slight, and the progression of weight from week to week or cycle to cycle, in small denominations. I just hate standing next to the barbell trying to calculate in my head what plates I need to give me the exact total I want, then having to pull about 2 or 3 off each side for the next set to reconfigure them for another odd numbered total.

An increase of 2.5kg to a 220kg deadlift is a bit over 1%...maybe not enough for your muscles to notice it (I bet they will) or be a bragging point to someone else, but that's the point...you do this minuscule increase another 3 times and in 2 weeks you've cracked 230. Now we know weight lifting isn't linear, so we know you can't just keep on doing this forever (even 2.5kg a week is 120kg across the course of a year); there will come a point where you can lift xxx but can't lift xxx+2.5kg, and then suddenly the 1.25kg plates aren't a pain in the arse to calculate, they're a pain in the arse to lift!!!

Bank the 225 or 222.5 and go up from there. 1.25kg plates added 20kg to my deadlift 1RM, as opposed to stepping up even 5kg at a time.

That is the worst logic I've heard for someone trying to get stronger lol

My point was he got the 220, got the 230 above the knees. Yeah he could have just chucked a couple kilos on 220 and made the lift. But now he knows his limits and sticking points. Unless it's a comp it doesn't really matter if you miss a lift.

If you make the 225 you end up stronger from succeeding with the lift. Getting stronger happens with progression and a failed lift isn't progression; an increase in amount of weight lifted is. Case in point: his PB is still 220. My point is that a 10kg leap is unnecessarily large when shooting for a new pb at the kind of weight he's doing, hence recommendation to give a 5kg or even 2.5kg increase a go and bank some more weight. Then the leap from that to 230 isn't so big.

In a competition, is ironically where you would put up a number that you don't know if you can get or not...on the 3rd lift.

I understand the point you're putting across, which is also right.

The one I was trying to make us that it doesn't matter if he makes the lift as long as something is learned from it.

If he'd have done say 225 and made it he may not have pursued the research that showed he needed to change the start position slightly, which will benefit him later on

I wouldn't argue with points made but also wouldn't argue a crack at 10kg extra on occasion.

Failing teaches you things.getting the PB's up becomes mental.Learning to persevere and back yourself are very impotant. An old training technique is to tell someone there is less weight (or more ) on than there really is. Numbers can intimidate or distract you ,making you lose effectiveness.

I get you Birds. But problem is, I would be unlikely to be stepping up my weight successively for week after week, particularly if I was following a program like, say 5/3/1, which would involve a cycle of 4 weeks with the 4th and final being a deload. When you also factor in the other variables like diet, sleep, stress, other physical activity and lifting on the day/week in question, it's really not a linear progression (even if the line of best fit would resemble more or less a straight line if one were to plot their calculated or actual 1RMs) but instead there's a lot of randomness to it. I happened to feel pretty strong on the day. Having said all of that, I acknowledge 10kg was a significant bump up from my previous max. That previous max of 220 btw, was done back in November. My sets this time were 70x10, 70x10, 110x6, 150x4, 190x1, 210x1, 230x0

All I'm saying is you would have had 225, prolly even 227.5; a new PB plus taught your body to lift that much weight. Not saying you were wrong to try a 10kg step up...go for your life...everyone has failed a 1RM this way before and you almost had that lift - it was just a suggestion for your next 1RM attempt, that you try a smaller increment. It's an easier physical and mental battle. Bank the weight away throigu a full range of motion and be happy with an increase/progression - it's amazing how much stronger the body can grow with even a 2.5kg jump in the 1RM. It can easily add a couple of reps to heavy volume sets during your next session, which in turn help your 1RM.

Regardless, you will one day get to a point where to realistically progress in the 1RM, all you can do is add 2.5kg to it. As we all agree, lifting weight is not linear, so one day it will plateau and you will need to resort to this kind of increment anyway.

I'm actuallly surprised you lost the lift at the point you did - very close to lockout and thought you were there. If I can get a deadlift that high I can usually lock it out. My sticking point is just above the knees where I struggle with a 1RM. I need to hit the rack pulls.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...