Jump to content
SAU Community

Recommended Posts

Well, after a couple of months of sweating the ID inspection, I got the 34 with NSW plates through Sturt Police today.

I thought that it would be referred to Regency for further inspection but it didn't happen. One of the boxes on the inspection sheet asks if further inspection is necessary but he ticked the 'NO' box......whew. :thumbsup:

Obviously coilovers, lowered slightly, airpods, wheelspacers, Kakimoto Dual N1 exhaust & BBS wheels with 265 rubber are all OK as long as they're within spec and all mounted well.

Now I can finally bolt on all the stuff that I've been acumulating for a few months.

good to hear :thumbsup:

Thanks Cara

hey congrats man!

post up some pics with the new goodies??

Thanks, I'll try.........but its things like bigger garrett turbos, cams, power fc, hks elec boost controller, injectors, fuel pump rail & reg, bigger tube & fin fmic, different air pods, improve existing exhaust with split dump pipes etc, better clutch and a few other hidden things.

Most of that stuff you don't realy see unfortuantely.

what garret turbos u thinking?

Wanted to stay low mount so I've already bought a pair of GT2860R 707160 -5.

No point in going top mounts or big single unless it sees the track or drag strip more than the street.

Thanks, I'll try.........but its things like bigger garrett turbos, cams, power fc, hks elec boost controller, injectors, fuel pump rail & reg, bigger tube & fin fmic, different air pods, improve existing exhaust with split dump pipes etc, better clutch and a few other hidden things.

Most of that stuff you don't realy see unfortuantely.

Wanted to stay low mount so I've already bought a pair of GT2860R 707160 -5.

No point in going top mounts or big single unless it sees the track or drag strip more than the street.

Not wasting any time are you? 350-400rwkW here we come.

*cough* and some 32s * cough*

*cough* and some stageas *cough*...lol ;)

Seriously though, the 2860rs -5 are basically the same size as the standard turbos from the research ive done recently, just with steel wheels.

Ive just fitted the 2860rs-7 to my 260rs, which in my case was the biggest i could go and keep them low mount cos theres not alot of room under there! The next up from there is either a -9 or -10 which the exhaust housings were too large to be mounted, but also they dont come on boost til very late either so it doesnt make it very streetable as a daily.

Not gospel of course, just what i had found out doing some poking around, so might be something you want to check! :(

*cough* and some stageas *cough*...lol >_<

Seriously though, the 2860rs -5 are basically the same size as the standard turbos from the research ive done recently, just with steel wheels.

Ive just fitted the 2860rs-7 to my 260rs, which in my case was the biggest i could go and keep them low mount cos theres not alot of room under there! The next up from there is either a -9 or -10 which the exhaust housings were too large to be mounted, but also they dont come on boost til very late either so it doesnt make it very streetable as a daily.

Not gospel of course, just what i had found out doing some poking around, so might be something you want to check! :P

i think you got the sizes mixed up

2860-5 (2530's) isnt same size as the standard turbos, and -5 is bigger than -7

*cough* and some stageas *cough*...lol >_<

Seriously though, the 2860rs -5 are basically the same size as the standard turbos from the research ive done recently, just with steel wheels.

Ive just fitted the 2860rs-7 to my 260rs, which in my case was the biggest i could go and keep them low mount cos theres not alot of room under there! The next up from there is either a -9 or -10 which the exhaust housings were too large to be mounted, but also they dont come on boost til very late either so it doesnt make it very streetable as a daily.

Not gospel of course, just what i had found out doing some poking around, so might be something you want to check! :P

Had me worried there for a minute :) . Just did some research and found the standard turbos have a .53 housing (actually stamped on the turbos) where the -5 has a .60 & .64 respectively. The -10 has a .64 with an optional .86 housing (too laggy for street and too narrow power band).

Also found out something interesting.....all new GT28 housings out of Garrett now are stamped 2560R but specs are still the same as 2860R....this straight from their website:

For those familiar with our product range, this means that the unit formerly known as "the GT28R" (part number 466541-1) is now in the GT25R family. More specifically, it is now a GT2560R model.

Wow, I can't believe it got through with wheel spacers - it really was your lucky day.

Sounds like your plans are for a nice tough real streetable GTR.

Surprised me thats for sure......probably because the wheels are just inside the guards that he didn't look or care about it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Haggerty this is your red flag. In MAP based ECU's the Manifold pressure X RPM calculation is how the engine knows it is actually...running/going through ANY load. You are confusing the term 'base map' with your base VE/Fuel table. When most people say 'base map' they mean the stock entire tune shipped with the ECU, hopefully aimed at a specific car/setup to use as a base for beginning to tune your specific car. Haltech has a lot of documentation (or at least they used to, I expect it to be better now). Read it voraciously.
    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
×
×
  • Create New...