Jump to content
SAU Community

Recommended Posts

Hey guys,

I have been asked to book a Driver Training day on the skidpan at the AHG Facility in Kewdale for you Stagea Folk!!

The training is held in a controlled environment on a skidpan with instructors. We have paid for two instructors so everyone gets more time training (otherwise a lot of time is lost while the instructor changes cars). I am unsure who the instructors will be at the moment, however i have done several of these days and recommend any of thier instructors.

You will do a variety of motor kahna style challenges, which aim to teach things like handling of your vehicle and braking.

HELMETS ARE REQUIRED!!!!

When - Sunday 30th March 2008

Time - 12pm SHARP - 4.30pm. Driver briefing is at 12pm so BE ON TIME!!

Cost - $75 per driver

Where - AHG Driver Training Facility. Grogan Road Perth International Airport

Please note this is primarily a Stagea only event. Places will go to Stageas first and if there are any left after a week, non-Stagea drivers will be offered the remaining spots.

There are only 16 spots available so please PM me if you wish to participate (please give me your full full name aswell) and I will put you on the list, and send you my bank account details - as you will need to pay within 7 days to confirm your spot. (First in first served basis sorry) If you wish to pay me by cash, PM me and ill tell you where i can be found during the day.

Your name will NOT be added to the attendees list unless you PM me, this means I won't be taking names down from people just posting in the thread.

Driver/Vehicle requirements

Long Sleeve top, long pants required

Helmet

Fully enclosed foot wear

Drivers Licence

Car to be registered with no safety defects

Seatbelts

All loose items removed from inside the vehicle

Road legal tyres (no slicks)

Common sense and a sense of humour.

I will be organising plenty of soft drink, water and snack.

If you have any questions, please feel free to contact me. As i work during the day i will normally respond to PM's regarding this in the evenings (job etc to do during the day >_< )so if you dont get an instant reply, dont panic.

Lets get started!!!!

Cheers

bard

SAUWA Motorsport Co-ordinator

ATTENDEES

1. Ssshonky - Loretta (PAID)

2. Jippa (Jerome) (PAID)

3. Snapper (Cory) (PAID)

4.

5. Unique1 (bard) (PAID)

6. SuperSweet (Hannah) (PAID)

7. Gr33die (PAID)

8. Sidewayssam (PAID)

9. StinkyRooster (Dale) (PAID)

10. nDuDut

11. Appealing (Iolanda) PAID

12. R Dirty 3 *(bard) (PAID)

13. GTST Vspec (Paul) (PAID)

14. Bubba (PAID)

15. SkyRyan (PAID)

16. Pimpin33

260rsstagea (Daniel) (PAID)

Mitchy (Mitchy) (PAID)

Kylie (StageGirl) (PAID)

STAND BY (Non Stageas)

Edited by R DIRTY 3
Link to comment
https://www.sau.com.au/forums/topic/200942-stagea-driver-training-day-ahg/
Share on other sites

  • Replies 245
  • Created
  • Last Reply

Top Posters In This Topic

Dibs on the first non-stagea spot!!!!!

Also, is this a skid pan only event, or will we be able to have a crack at the track as well?

And Brad - Sif you have work to do during the day >_<

ssshonky, yeah $75 per driver. Its a Stagea yeah? PM sent.

The helmet rule was past about 12 months ago that any body in any vehicle on the skid pans or track must have have a helmet. Insurance politics! Same rule for everyone noadays ;)

Dibs on the first non-stagea spot!!!!!

Also, is this a skid pan only event, or will we be able to have a crack at the track as well?

And Brad - Sif you have work to do during the day :P

SENT A PM DALE SO LETS HAVE A GOOD DAY ARRIVE BACK FROM BALI THE NIGHT BEFORE BUT WHO CARES GIVING A STAG A GOOD OLD THRASIN IS WORTH MORE THAN SLEEP SO LETS GO !

I though general opinion was that Mitchy was allowed in because he has a 6cyl, AWD wagon? :P

Jippa, ya going to let him in? Its your event basically, so its your call mate.

Snapper, you will be driving a Stagea yeah? Just asking as this is a Stagea only event and i dont know alot of you guys LOL

Cheers

Brad

Edited by R DIRTY 3
I though general opinion was that Mitchy was allowed in because he has a 6cyl, AWD wagon? :P

Jippa, ya going to let him in? Its your event basically, so its your call mate.

Snapper, you will be driving a Stagea yeah? Just asking as this is a Stagea only event and i dont know alot of you guys LOL

Cheers

Brad

should be fine. meets most of the requirements

im in with my stagea, i'd be pretty sure it should be going fine at that time, what happens if its not running for some reason? can i use my other car if u cant get anyone else with a stagea in? its a mitsubishi gto so its not a piece of shit haha. Would i get a refund if i couldnt take the stagea and u find someone else to fill the spot with a stagea?

PM sent in about 2 min from now :P

Brad, ive made the spot for you. Hopefully you will be in Stagea. If not, and there is someone with a stagea waiting, we will work out the payment side of things between us as i dont usually do refunds...but exceptions are made of course! Should be no problem. However, if Jippa has no problem with it, id say bring out the other car.....but Stagea would be better :P

Yeah Brad

can you please post up an agenda.... or a link to what this all entails.

I put up another post in the (now) defunct thread.

I may have the answer now..... a set of std tyres and rims for the skidpan, then being wet won't matter so much..... but if we are using the track then won't we want maximum traction.... I'm confused!

('sOK I'll run the old std tyres....it wont matter as the laps aren't being timed).

Thanks

PM me payment details please.....

Both Iolanda & I will be turning up..... and taking turns driving.

This event utilises a SINGLE SKID PAN only! NOT the track.

realy, i was under the impression we were. how or can we get a go on the track? this was the main reason i was interested but am still happy with skid pan

The second line of my first post in this thred states its the "skidpan" that we use.

I am unaware of any training course that uses the track. The only way i am aware you can use the track is enter into the sprint round, or make a tuning day which is 2 hours, for 16 people. Track time does get limited.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...