Jump to content
SAU Community

Recommended Posts

:rolleyes: I was cleaning my engine bay yesterday and when I took off my oil fill cap to clean around it, I could smell fuel. I stuck my nose down and yes, the fuel smell was so strong I couldn't smell the oil. Many years of motoring and I have never run into this. Is it normal for a twin turbo? What would cause this? I'm getting good gas mileage. The engine runs strong, oil pressure is good. Any ideas?
Link to comment
https://www.sau.com.au/forums/topic/201109-oil-smells-like-fuel/
Share on other sites

Most likely due to blow by gasses. Combustion gases leak past the rings and get into the sump. Thats the whole reason for having positive crankcase ventilation (PCV). To remove those gases from the sump. If they build up too much is can become dangerous. Check that your PCV valve, located on the inlet manifold balance tube, isnt blocked, with the engine off shake the valve to make sure it rattles, this indicates its not jammed. Also check it has a strong vacuum there when the engine is running.

PS: The only time people use mineral oil in import engines is to run them in. Synthetic oil isnt made from crude oil.

Deren

Edited by Godzilla32
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...