Gtr Crank

[skylinekid]

im putting a gtr crank into my gtst block but im unsure if the twin plate from my gtst will bolt upto the back of the gtr crank does neone know if the holes line up from gtst to gtr

[Adriano]

They are all the same

[skylinekid]

They are all the same

thank christ for that i was frettin for that it wouldnt fit... phewww

[1TUF33]

are you JUST putting in a gtr crank, or is your engine getting built? im 100% sure gtr cranks have different strokes

[skylinekid]

are you JUST putting in a gtr crank, or is your engine getting built? im 100% sure gtr cranks have different strokes

yeh im building engine i know stroke difference gtst 71.7mm gtr 73.7mm.... the rods are exactly the same length i think its 121.5mm correct me if im wrong. using eagle h beams if ur curious. and im using gtr sized pistons.. je's with gapless rings

[R31Nismoid]

Just use GTR rods, cheap, easy, workable.

Then grab forgies for a RB26.

Done deal

[skylinekid]

Just use GTR rods, cheap, easy, workable.

Then grab forgies for a RB26.

Done deal

hahah no thanks..... 650bucks for eagles h's.... plus i do believe there stronger then gtr rods

[R31Nismoid]

well of course, you'd like to think that was so for something 6 times the cost

[Swiper the Fox]

hahah no thanks..... 650bucks for eagles h's.... plus i do believe there stronger then gtr rods

unless your going for mega power GTR rods will be fine...lived quite well in our racecar for three seasons making 450+AWKW. Ive got a prepped set here on the shelf for less than 1/2 that price (cryo treated, shotpeened etc). Ive never heard of a stock GTR rod failing because of its lack of strength.

[skylinekid]

well of course, you'd like to think that was so for something 6 times the cost

owell im still goin h beams... thats will never be changed