Jump to content
SAU Community

Recommended Posts

Currently Im running a dual diafram clutchnet PP with 6puc sprung disk and a fidanza ally flywheel, thing shudders A LOT, its not a very nice formualtion they used for the disk pad's. For now it has been ok, land up with a very sore left foot and battle to pull away in the wet or up my driveway without chriping the tires.

I am not looking towards somthing with lighter clutch pedal effort, and slightly more HP capability to suit the new motor with around 400kw, Been looking at some twin plate's and from previous experience with the old school twin plates it leaves me with a sour taste, is there anything on the market you guys use that is not to brutal with shudder and clutch load yet can hold some decent power? Did a search but couldnt find anything useful.

The car is used on the street with very ocasional track usage, and the odd drag with fairly small M/T ET streets

Thanks

Currently Im running a dual diafram clutchnet PP with 6puc sprung disk and a fidanza ally flywheel, thing shudders A LOT, its not a very nice formualtion they used for the disk pad's. For now it has been ok, land up with a very sore left foot and battle to pull away in the wet or up my driveway without chriping the tires.

I am not looking towards somthing with lighter clutch pedal effort, and slightly more HP capability to suit the new motor with around 400kw, Been looking at some twin plate's and from previous experience with the old school twin plates it leaves me with a sour taste, is there anything on the market you guys use that is not to brutal with shudder and clutch load yet can hold some decent power? Did a search but couldnt find anything useful.

The car is used on the street with very ocasional track usage, and the odd drag with fairly small M/T ET streets

Thanks

tripple plate OS giken is the g-o, tuff as nails and they dont shudder

tripple plate OS giken is the g-o, tuff as nails and they dont shudder

What is the pedal weight like? I need somthing that wont kill me in a little bit of traffic, I nengun dont sell them, any idea who does or rough price idea?

Take a look at the Nismo Super Coppermix twin plate, i haven't personally used it but from what i hear its very similar to a standard organic clutch in terms of drive ability around town and is rated for 600hp.

http://www.nengun.com/nismo/super-coppermi...in-plate-clutch

ATS carbon twin plate

is the stuff factory pedal soft just no slip

They are a touch out of my budget unfortunatly,

Looks like a toss up between the Nismo supercoppermix twin and the ORC 709, has anyone got first hand experience with the orc 709?

Contact jim berry in Bris. He made me an organic clutch for my gtr. done heaps of launches and a couple of sprint meets & hasnt let me down. easy to use in traffic & light under foot, doesnt shudder either.

People go overboard with expensive twin, triple & button clutches but it isnt required or practical for most applications.

It only cost me about $350 too.

iv got a orc 2win plate button, its light under the foot, a lil noisy when u step on it, but takes a long time to get use to and not the best on hils or ups n downs or TRAFIC. in fact its real bitch to park in tight spots but u get use to it how ever i always avoid trafic even if it means ill just sit n have a drink till 6 .. not worth the head ache..

might try the nismos next to see..

  • 1 year later...

I had huge problems in my old 33. Went through 2 exedy's under wty then gave up. My old man who is a mechanic got me onto somebody in lismore he has known for 30+ years that did an awesome job on a nice single for me. Held my 345rwkw no problems no matter how i drove it :)

Have a chat to Dave Write on 0266216495. Best thing i ever done. Cheap, quick and he said he builds a few big hp skyline clutches for a few workshops in sydney

Edited by coaster

I'm using an NPC single to hold around the horsepower you are looking to make. Pedal weight is as light if not lighter than stock. Its a bit sudden but quite easy to control once you learn it.

Kills the berry single I had prior to this. Berry clutch was just as grabby but way heavier pedal and with less clamping pressure than the NPC.

been more than 18 months now since I went with the Nismo supercopper mix twin plate, best clutch I have ever used! and as with all things car I landed up with 150kw more than antisipated in the power department... The Nismo clutch feels no pain when the T04z is at full tilt.

I stripped it out last week to change the N1 oil pump, clutch after 20 000km's of abuse still looks like new. Still running as smooth as stock and the only con is a tiny little bit heavier than stock clutch, probably within 10%.

been more than 18 months now since I went with the Nismo supercopper mix twin plate, best clutch I have ever used! and as with all things car I landed up with 150kw more than antisipated in the power department... The Nismo clutch feels no pain when the T04z is at full tilt.

I stripped it out last week to change the N1 oil pump, clutch after 20 000km's of abuse still looks like new. Still running as smooth as stock and the only con is a tiny little bit heavier than stock clutch, probably within 10%.

Sounds to me like you've answered your own question. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...