Jump to content
SAU Community

Recommended Posts

Hey all,

I got a r32 gtst-t RB20DET and a few weeksago it was running on 5 cylinders. I unplugged coilpacks one by one and found cylinder 2 was no go. I pulled out the sparkplug and coilpack and cleaned them, put them back in and it was good.

Its just happened again. Yesterday i change oil filter and oil. Then regapped plugs from 1mm to 0.8mm (with feeler gauges) Then started car and it was running on 5 cylinders. Checked them and it was cylinder 2 again. So i bought new plugs and put them in and still same thing. Then i pulled the coilpack off sparkplug and left it connected, started the car and it was definately working as electricity was coming out.

Still no good.... so i compression tested motor and it has 150psi across all cylinders. What could be happening?? Im thinking maybe the igniter??

I bought splitfire coilpacks.. on their way.. but im geussing they dont have a new igniter. Are there any cheap aftermarket igniters? Are r33 and r32 igniters the same? Or is it definately not the igniter///?

cheers

Link to comment
https://www.sau.com.au/forums/topic/201215-rb20det-cylinder-2-no-go/
Share on other sites

i changed the plugs thinking they may be at fault.

The coilpack is sparking but some one PM me and said its easier for coilpack to spark to atmosphere than it is when its inside engine..

As for the loom.... i have llooked but not many wires are uncovered... i will try a mates loom and see how it goes..

also a question... i had the coilpack plugged into loom but not on sparkplug... turned the car on and sparks were coming from underneath where i expected at bottom of stem... but also at the top... is this not right?? Or is it meant to spark there too. Im guessing its not. Ive been told to put silicone on my coilpacks to increase their performance but never understood what they meant... im thinking maybe put silicome at the top to stop loose sparks??

thanks

ok... so still having troubles really in need of help.

Sum it up... cylindr 2 is not firing still. I know this cause when i unplug cyl 2 coilpack look it stays same (running bad) then any others makes it worse.

Remedies i have tried to fix it but to no avail..

Brand new Colder NGK Spark Plugs

Brand new SplitFire coilpacks

Igniter off a working skyling

Coilpack loom

Compression tested to 150psi

STILL NO GOOD!!!! What else can it be!! Im in dieing need. Please help

Have you checked that its not fuel that is the problem in #2?

Is the injector firing?

jus spoke to mechanic today nd he said to check if injectors r running. I dnt really know what im looking for but i geuss ill put a pices of steel rod against injector and use it as a stethascope (sp) and listen for a little tick. If number 2 had a dull sound it obviously isnt wrking correctly. But he said it still might tick but fuel just might not be getting through.

Ill check this sometime tomoro or sunday and post up.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...