Jump to content
SAU Community

Recommended Posts

I'm about to install my sub/subs into the 34 when I've found a suitable amp and i'm tossing up a few options. I can install 1 or 2 10" subs and i'm looking for the most space saving install as I use the boot for groceries etc. One possibility I was tossing up was installing the two, one on either side of the boot in those "pocket-type' areas. Anyone willing to share pics of their setups so I can get some more ideas. I was also wondering if anyone was able to tell me what an approximate 'fabrication cost' would be for the setup i suggested done professionally?

Cheers

Yvonne

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/
Share on other sites

here is a pic of my sub + amp in a box (12" JVC active sub) along with my separate 2 channel JVC amp which is powering my DLS front

its a bit messy at the moment but only cause i just wanted that sub in!!!!!

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3584608
Share on other sites

you can get premanufactured sub boxes that are moulded to the left corner of the r34 boot. when ive got the money together to get a decent sub and amp ill be getting one. they're about $300ish for a 12" sub. probly much the same cost for 10" maybe a bit less.

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3586260
Share on other sites

you can get premanufactured sub boxes that are moulded to the left corner of the r34 boot. when ive got the money together to get a decent sub and amp ill be getting one. they're about $300ish for a 12" sub. probly much the same cost for 10" maybe a bit less.

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:(

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3587643
Share on other sites

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:)

Would like to know this information too! :(

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3587878
Share on other sites

Any idea who makes these? Can you get them fir the right side too? ...*thinking* ... Would be a nice alternative to the big 2 x 12" sub box i have now ..

:P

Ive been quoted them from Maroochy Car Sound and Sound In Motion here on the sunshine coast. They are only moulded for left side. i guess something to do with it being in the way of things on the right side. Ive seen one moulded for a 33 and they take up fark all space.

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3588538
Share on other sites

here is a pic of the install in my r34. sub was mounted in the tyrewell and amp mounted on a new board under the strut brace. keeps plent of boot room aswell!

post-9854-1200456448_thumb.jpgpost-9854-1200456523_thumb.jpg

heya bro.. that setup seems strangely familiar :)

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3589165
Share on other sites

here is a pic of the install in my r34. sub was mounted in the tyrewell and amp mounted on a new board under the strut brace. keeps plent of boot room aswell!

Plenty of boot room but you cant exactly use it without something possibly poking through the sub! Needs a sub cover/grill to protect it then the boot room would be usable :)

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3589371
Share on other sites

  • 3 weeks later...
there is a fellow on the GC that makes them for wholesale to shops. I can get hem as well but I'm not sure if he does a 34 though.

Reckon he would do a group buy on them?

Say 10 of each, r32 r33 r34?

Id be VERY keen depending on price

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3621521
Share on other sites

hey guys

here is my sub install. has plenty of room in the boot for other shit. i havent yet finished it. still needs the false floor made up and side closure panels to complete the sub facia.

cmplex design on the box, has a L shaped box with curved in sides. sounds good, specs say 1.25sq ft for the proper sealed box, mine is about 1.10sqft. little under size but not noticeable.

will post more pics once i complete it this weekend or mid net week

post-31466-1202382468_thumb.jpg

post-31466-1202382558_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3631240
Share on other sites

hey guys

here is my sub install. has plenty of room in the boot for other shit. i havent yet finished it. still needs the false floor made up and side closure panels to complete the sub facia.

cmplex design on the box, has a L shaped box with curved in sides. sounds good, specs say 1.25sq ft for the proper sealed box, mine is about 1.10sqft. little under size but not noticeable.

will post more pics once i complete it this weekend or mid net week

Keep us updated dude!

Link to comment
https://www.sau.com.au/forums/topic/201541-r34-sub-setup/#findComment-3632085
Share on other sites

  • 3 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...