Jump to content
SAU Community

Recommended Posts

Hi Guys.

Is there a smart way to remove the speedlimit at 180 km/h, on my supra i have a HKS Speedlimit Defencer, can i get the same device for the Stagea, or how.!

In my dashboard, it shows max at 180 km/h, can i get another (I dont know the word) with max speed at 240/260/300 km/h.!

Edited by Stagea Denmark
Link to comment
https://www.sau.com.au/forums/topic/202484-jp-180-kmh/
Share on other sites

pivot speed meter is the way to go as it gives you the accurate readout and also displays some other handy stuff like 100mtr,200mtr,300mtr and 400mtr times along with max speed and average speed for that trip etc.

check it out and see what you reckon.

i have one and have found it to be a very nice little bit of kit.

chers oxford

Link to comment
https://www.sau.com.au/forums/topic/202484-jp-180-kmh/#findComment-3594871
Share on other sites

Just had a look at that (googled it)

It removes the speed limiter and reads ur speed out digitally. Nice!

Nismo Make a 320 KPH Speedo for skylines etc but not sure if there is a stagea one...???

Best thing is that it would look factory and anyone that sees your speedo would be like WTF its a wagon with a 10,000RPM tacho and 320KPH speedo...

Bit of cool.

Link to comment
https://www.sau.com.au/forums/topic/202484-jp-180-kmh/#findComment-3594894
Share on other sites

Hi Guys.

Is there a smart way to remove the speedlimit at 180 km/h, on my supra i have a HKS Speedlimit Defencer, can i get the same device for the Stagea, or how.!

In my dashboard, it shows max at 180 km/h, can i get another (I dont know the word) with max speed at 240/260/300 km/h.!

look in the TRD book. I seem to remember one of the getaway in stockholm vids with a JZA80 supra with a 300kmh one.

Link to comment
https://www.sau.com.au/forums/topic/202484-jp-180-kmh/#findComment-3594907
Share on other sites

look in the TRD book. I seem to remember one of the getaway in stockholm vids with a JZA80 supra with a 300kmh one.

I dont think TRD parts fit in my Stagea, i can buy everything for my Supra, and when i surf the internet to find parts for the Stagea, it is very difficult to find parts like that.

Thanks for the replys.

Link to comment
https://www.sau.com.au/forums/topic/202484-jp-180-kmh/#findComment-3595094
Share on other sites

Any SLD (Speed Limit Defencer) will work, I use the generic HKS one.

When looking for Stagea parts try;

R33GTST for the engine if it's an S1 and R34GTT if it's a S2

Automatic gearbox is the same as R33GTST if it's an S1 and R34GTT if it's a S2

Manual gearbox is the same as R33GS4 if it's an S1 and R33GTR if it's a S2

ATTESA is the same as R33GTR

etc etc

I have yet ro find one mechanical part (not trim or body panels) that isn't the same as some model of Skyline, usually R33 or R34.

Cheers

Gary

Link to comment
https://www.sau.com.au/forums/topic/202484-jp-180-kmh/#findComment-3595468
Share on other sites

(except perhaps S2 front brakes)?

also keep in mind while the S1 motor is R33 gtst, the loom is r34 gtt, so be careful with ECUs, pin outs for electrical interceptors etc. And the bloody front pipe only some of those fit.

But the rest of it has been dead easy to get bits for, thanks Nissan :D

Link to comment
https://www.sau.com.au/forums/topic/202484-jp-180-kmh/#findComment-3595508
Share on other sites

<snip>......ATTESA is the same as R33GTR ......

Uh, the hardware isn't - the series 1 shares transfer case, driveshafts etc with the R33 GT-4 (and that was only ever released as NA, not turbo so the engine and stuff is fairly different to the RS stageas) so I think it is a little more complicated than that. Not to mention the amount of places it is possible to fall over on, in regards to the ECU, just like Duncan said.

Link to comment
https://www.sau.com.au/forums/topic/202484-jp-180-kmh/#findComment-3595567
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ok so will run the piping over that radiator and no plenum it is. Put that money towards a Haltech and see what suits. Any ideas something like an elite 2000 or 2500 right? My long term goal is 300kw e85 and manual swap and that’s a dream come true. For now will be 200kw and auto the stock rb25det neo intake isn’t too expensive with throttle body. If I was to have the port matching done, Would that be better than the stock de intake as the det has bigger holes plus has the spots for sensors etc? And suit more long term?  appreciate the advice?   
    • You understand AFR is not the only thing that contributes to it pinging yeah? Funnily, what the AFR gauge will tell you when it likely is pinging, is going to make you think things are really safe and good.
    • Run the piping how we all have for decades. Also the duel runners with the +T setup dramatically helps it gets on boost quicker. Yes, chase huge power it'll become a problem, but you're a long way off when you're already saying an aftermarket ECU is out of the budget. You also say NisTune as it's simple, and then immediately say it'll be painful, meaning... It won't be simple. It will likely cost you a lot more stuffing around with a Nistune, than just putting a Haltech or similar in.
    • I’ll order an afr gauge to keep an eye on it.  Then will get a haltech soon 
    • TD05 or maybe pulsar PSR2867r Gen 2?  id love a garret but it’s quite out the budget for now and I’m not chasing crazy power.    yeh fuel pump haven’t looked into but whatever works, kind of last on my list.    Nistune because it’s simple but Ik it’s a lot of pain especially as I’m auto +t with the whole seperate TCM etc still investigating that. Haltech id love but once budget tight for now atleast.    finally the reason I’m trying for a plenum instead of the stock intake is I already have a standard Intercooler mounted etc. so the ports are on both sides so trying to not have to go over the clutch fan radiator etc. trying to find a good deal return flow if I don’t than this will do for now I guess. btw any ideas with that, apparently some people have to cut blades to reduce it from hitting the Intercooler piping over the radiator ? Thanks 
×
×
  • Create New...