Jump to content
SAU Community

Recommended Posts

Hows it going.

Im new to the forum so please excuse me if i posted this up in the wrong joint.

Anyways, im looking to buy a N/A R33 GTS4 (with sunroof) and kitted up before October.

Ive seen alot of threads on VIC dealers, but i was wondering if you guys can help me by pointing me towards a good dealership that wont screw me over :( .

I was GOING TO buy off JSA up in VIC, but two reason stopped me, negative feedback from some people here and the fact that its up in VIC lol.

Anyways thanks alot in advance .

MR_XTC

HOWDY,

If yo have til oct, and want the best return for your dollar, why not try to import one?. I have just bought a Gtr in Tokyo, through an agent, now I'm waiting for the car to be shipped. the process has been painless and I believe I have the car I wanted at the right price.

Powerplay Imports, No question.

If they don't go to the edge of the earth to meet your requirements, they'll go close enough till they can see it! Alistair and Jo-ann are some of the hardest working and nicest people you could ever encounter in the grey import industry.

They pulled my Stagea from Customs, had it trucked to their workshop, complied it, went over it and fixed the niggling mechanical issues (loose ball joint, leaking ATTESA modulator) and blueslipped it ready for rego. All that was left to do was pay for their services, register the car and drive it home.

I can't speak highly enough of them and would highly recommend their extremely capable services to anyone.

Super happy camper here.

Edited by Xmetal
Powerplay Imports, No question.

If they don't go to the edge of the earth to meet your requirements, they'll go close enough till they can see it! Alistair and Jo-ann are some of the hardest working and nicest people you could ever encounter in the grey import industry.

They pulled my Stagea from Customs, had it trucked to their workshop, complied it, went over it and fixed the niggling mechanical issues (loose ball joint, leaking ATTESA modulator) and blueslipped it ready for rego. All that was left to do was pay for their services, register the car and drive it home.

I can't speak highly enough of them and would highly recommend their extremely capable services to anyone.

Super happy camper here.

+1

Joel from ExciteAutos.com .. Powerplay are great dont get me wrong but hell expensive.. but the car quality is exceptional.. As is Joels.. Hes in Castle Hill.. PM me if you want his number good bloke

  • 3 months later...

I had a bad experience with Envy Imports on the Northern Beachers of Sydney.

NOTE: This may not be reflective of their usual cars or items, but this was the case for my single purchase.

I puchased a Nissan 180sx from the dealership that was listing cars on behalf of Envy Imports, it was a nice Blue CA powered machine, seemed alright, had lowish but realistic looking kms, a couple of small cracks, no boot rust, and engine bay was clean.

Car came with New front tires (although I later saw "NOT FOR ROAD USE, FOR TESTING ONLY" stamped on the tires) and the rears where almost through to the belts (but the rear tires had the same batch number for the tires as the fronts, so they where from the same batch, and chances are they where installed at the same time, so car DEFINATELY had a thrashing.

Anyway, purchased car, asked for tires to be replaced, road worthy, etc as it had nevre been registered prior (this was a Sunday).

Picked up the car the very next Wednesday, same tires all around still on the car, but was complied and registered.

Drove it home and was pulled over by an interested cop, he found the tires, but he was nice enough to give me a warning when I showed him the receipt of car purchase, and the fact I had only just picked it up and was disputing the lack of tires on it.

a few weeks later, I had put money away for timing belt (it was coming up to that time) and put it into the workshop.

Get a call from the workshop telling me to come and have a look at the car, I get there and there is a rust hole in the lower door sill on the passenger side, looked small enough, about the size of a mobile phone.

Anyway, rego was coming up (only had 3 months rego) so I took it back to Envy to get checked for the safety certificate, and was knocked back on the rust hole.

I took it to my panel beater to get the rust cut out, and found the rust was actually about 1 foot long, and was a monster job.

Got the rust cut out, and took it back to Envy, and it was passed.

Later, when replacing the A/C compressor due to bearing failure, I found a crack in the suspension tower about 6cm long, and right through to daylight on the other side, at this point, I sold the car 'as is, needs TLC'.

This particular car was rubbish, had been thrashed, was rusted right through, and was a general POS, the only thing good about it was the drive-line.

NOTE AGAIN: This might not be reflective of their general cars, but it was in the case of mine, I am not bagging Envy Imports, I have seen some quality come from their shop, but this was back about 4 yrs ago now, and the quality of this particular car was terrible.

B.

Hows it going.

Im new to the forum so please excuse me if i posted this up in the wrong joint.

Anyways, im looking to buy a N/A R33 GTS4 (with sunroof) and kitted up before October.

Ive seen alot of threads on VIC dealers, but i was wondering if you guys can help me by pointing me towards a good dealership that wont screw me over :banana: .

I was GOING TO buy off JSA up in VIC, but two reason stopped me, negative feedback from some people here and the fact that its up in VIC lol.

Anyways thanks alot in advance .

MR_XTC

If you do find a car you like, then don't make the mistake I almost made and be tempted by a place

that doesn't get mentioned fairly frequently on these forums.

If you can't google up some real feedback left over the last 12 months then be extremely cautious.

Also, assume the odo has been rolled back unless they can produce japanese documentation

showing otherwise.

I had a bad experience with Envy Imports on the Northern Beachers of Sydney.

NOTE: This may not be reflective of their usual cars or items, but this was the case for my single purchase.

I puchased a Nissan 180sx from the dealership that was listing cars on behalf of Envy Imports, it was a nice Blue CA powered machine, seemed alright, had lowish but realistic looking kms, a couple of small cracks, no boot rust, and engine bay was clean.

Car came with New front tires (although I later saw "NOT FOR ROAD USE, FOR TESTING ONLY" stamped on the tires) and the rears where almost through to the belts (but the rear tires had the same batch number for the tires as the fronts, so they where from the same batch, and chances are they where installed at the same time, so car DEFINATELY had a thrashing.

Anyway, purchased car, asked for tires to be replaced, road worthy, etc as it had nevre been registered prior (this was a Sunday).

Picked up the car the very next Wednesday, same tires all around still on the car, but was complied and registered.

Drove it home and was pulled over by an interested cop, he found the tires, but he was nice enough to give me a warning when I showed him the receipt of car purchase, and the fact I had only just picked it up and was disputing the lack of tires on it.

a few weeks later, I had put money away for timing belt (it was coming up to that time) and put it into the workshop.

Get a call from the workshop telling me to come and have a look at the car, I get there and there is a rust hole in the lower door sill on the passenger side, looked small enough, about the size of a mobile phone.

Anyway, rego was coming up (only had 3 months rego) so I took it back to Envy to get checked for the safety certificate, and was knocked back on the rust hole.

I took it to my panel beater to get the rust cut out, and found the rust was actually about 1 foot long, and was a monster job.

Got the rust cut out, and took it back to Envy, and it was passed.

Later, when replacing the A/C compressor due to bearing failure, I found a crack in the suspension tower about 6cm long, and right through to daylight on the other side, at this point, I sold the car 'as is, needs TLC'.

This particular car was rubbish, had been thrashed, was rusted right through, and was a general POS, the only thing good about it was the drive-line.

NOTE AGAIN: This might not be reflective of their general cars, but it was in the case of mine, I am not bagging Envy Imports, I have seen some quality come from their shop, but this was back about 4 yrs ago now, and the quality of this particular car was terrible.

B.

Sorry to hear :(

But why did you drive home when they didnt replace the tyres?

I would have asked for my money back, or demaned they did it on the spot before driving off home.

Guess it happened 4 years ago.. hmm

Sorry to hear :(

But why did you drive home when they didnt replace the tyres?

I would have asked for my money back, or demaned they did it on the spot before driving off home.

Guess it happened 4 years ago.. hmm

Because I was blinded by the fact I got the car I wanted after searching for 8 months, I was gobsmacked to be actually driving away in it, so I thought I could spare the extra few hundred for new rear tires.

If I had known the rest of the saga, I would have kept looking.

Guess that's the other thing, if you find the car you want, get SOMEONE ELSE to look it over, because you might be blinded in the fact you want the car and will overlook 'stuff'.

B.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...