Jump to content
SAU Community

Recommended Posts

Hey guys just after some proffesional clarification as I find this a tad confusing. I have an 2000 model R34 non turbo that is 2 door but AWD. A mate of mine beleives it is a GTS4. Now from reading this I understand that i need GTR suspension? is this correct? or is there R33 suspension that is suitable for me? Basically I just want to lower my car and stiffen the ride and have been told that coilovers are my best option. Its not a track car or anything so it doesnt have to be brand new or top of the line gear.

If anyone could help me out I would really appreciate it.

Cheers.

Unfortunately R34GTS4's are not the same as anything else. So you can't just grab a complete kit, it's a mix and match exercise. Being a 4WD the front shocks have to be the short style, like an R32/33/34GTR. But it doesn't have the same weight on the front (no turbos, no intercooler, smaller gearbox etc) so you need a lower front spring rate and lower spring free height than an R33/34GTR. At the rear the R34GTS4 doesn't have the alloy rear hubs that R34GTR's and R34GTT's have, it has cast iron hubs like an R33GTST and R34GT. That's why an R34GTS4 needs the rear shocks with the eyes (like an R33GTST) not the forks (like an R33/34GTR). The rear springs in R33and R34 all models are the same.

A summary of what you need;

R33/34GTR front shocks

R33GTST or R34GTT front springs

R33GTST rear shocks

R33/34GTR, R33GTST or R34GTT rear springs

Cheers

Gary

  • 3 years later...
  • 3 weeks later...
  • 3 months later...

Okay so i have a sedan 1999 R34 25gt-v.
What are my options here?

It is an N/A but i'm almost one hundred percent sure that a gt-v has the exact same suspension set-up as a gtt.
Therefor giving it the eye fork set-up i guess.
I assume from the previous posts i cant transfer coil overs from a coupe into my sedan?
Are there any previous model skylines ie. r32/r33/ coil overs i could purchase that i could just drop straight in?

Any help would be much appreciated :)
Cheers Tony.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...