Jump to content
SAU Community

Recommended Posts

i'm thinking of doing some circuit racing this year and was wondering what class people would recommend? i was thinking of super tt but i'm not sure cause i've never raced before. i don't think i'm going to be able to afford Drift Australia again this year, but i still want to compete in something. i'll have to modify my cage and i'm not sure if my standard brakes will be up to it, what pads do people use? thanks in advance for any tips. nathan weissel

Link to comment
https://www.sau.com.au/forums/topic/203476-category-for-ex-drift-32/
Share on other sites

Get some r33 or r34 brakes on it, nice wide semi comps, then take it hillclimbing :glare:

I know a place you can practice :laugh:

There's also the motokhana champs in addition to the hillclimb champs. Or the circuit club or the SSCC etc

Nathan,

It all depends what you want to do mate.

When you say race, as in grid racing like Improved Production or any "State series?"

Or supersprints etc with other clubs?

Doing any state rounds etc, Im pretty sure you'd need to modifiy the car in line with the rules and regs etc.

If you joined the SSCC, you can do their interclub series with the alfa,hsv and wrx clubs.

They do supersprints, hillclimbs and 'khana's. (these guys arent strict with mods and stuff!)

With their classing, Im fairly sure you would be in the SVD class.

I joined the SSCC and will be trying to get out to a few sprints.

Pads? check out the suspension/braking section - theres a brake pad user rating guide in there! All I have been using have been benedict's.

Cheers,

Chris

p.s. Steve, werent you meant to be joining the SSCC?!!?

i kind of like the idea of racing door to door with other cars.

Have a chat with Duncan. I know he is doing a series this year, one thing though I think there is alot of restrictions to mods etc.

p.s. Steve, werent you meant to be joining the SSCC?!!?

As soon as my cars moving under its own power ill send the money to them

Funny that, its up to this bloke :glare: .......

i kind of like the idea of racing door to door with other cars.

Didnt you say budget is a constraint?

Door to door wont be cheap. As far as racing on a budget goes IMO the SSCC sprints are good value (points are awarded etc)

what's sscc?

Click here

www.southernsportingcarclub.com.au

i talked to the promoter of arms today and he said my car should be ok in super tt and the handicaped thing sounds pretty cool.

"arms" ?

i'm not giving up drift, i might have to postpone it for this year due to lack of funds, but i should be right for next year. i'll still do local drift comps and interstate ones with decent prize money.

Edited by DRIFTER

yeah thats a shame to hear nathan - no doubt money is more important than talent in motorsport.

SuperTT for sure for an ex drift car.

Cams doesn't have any category suitable -

production cars like I run in are 99% standard including boost

improved production requires a 38mm restrictor (tiny) for turbos

sports sedans you would be legal for those but they are about 1.00 flat around wakefield.

AMRS is the most friendly for turbo cars in nsw, they run a couple of rounds in nsw each year. I'm going to try and do a round or 2 with them now I'm allowed to run a boost controller.

I haven't done a round with them yet, but I understand there is a maximum difference between your quakifying and race pace. Not sure what the penalty is but they've been doing this for afew years now,....

be a damn shame to not see you in DA this year, allways liked your driving style smooth and fast.

Would be very interesting to see how the car goes in proper racing, as in grip and power levels. And to see how someone thats been drifting goes in it.

Good luck!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...