Jump to content
SAU Community

Recommended Posts

its not my car :ermm: but the 34 im getting has that wing.

hmm yea doesn't look as bad without the sides like you said, but still not a big fan of it...

dscn0103704x528fl9.jpg

Hey mate, I have to agree... I just to have this wing on my R33 just for something different (just the wing itself without sidescraps) - but I gotta say, it looks nice but the only thing I didn't like was that it lent towards the back too much - if it was straight up and across like a T then that's fine, but it kinda "ducktailed" to the back too much which made it look rather funny.

Oh well, everyone to there own.

For a R34 - I recommend a OEM Wing.

go here: www.carmate.com - browse for your model, go to Wings and then look for the above wing I described - bet you will like it.

I was going to put this wing on my R33 with custom bootlid but ended up going GTR wing as with R33's only the GTR wing does it.

Good luck.

Is it to remove off a black 34? If so, just rip off the wing, clean up the boot, and plug up the holes with rubber grommets courtesy of Clark Rubber. If the car is black, you wont be able to see the grommets unless you're up close. Alternatively get the holes filled for about $300 at a panel shop, cos they will need to respray the whole boot.

its not hard to remove the nismo wing off the r34. its has 4 bolts through the boot and 2 through the guards on each side. undo all these and done, wing comes off. like others have said, u can patch up the holes in the rear guards and have them re-sprayed, and the ones in the boot i believe still align with an oem wing so try that on before drilling any new holes.

its not my car :) but the 34 im getting has that wing.

hmm yea doesn't look as bad without the sides like you said, but still not a big fan of it...

dscn0103704x528fl9.jpg

My car looks like that now lol

I've already bought a copy GTR wing, just need to fin time to have it painted and the holes patched up.

Bloody Nissan, the side wing parts leave 7 gaping holes on each side of the rear quarters :(

its not hard to remove the nismo wing off the r34. its has 4 bolts through the boot and 2 through the guards on each side. undo all these and done, wing comes off. like others have said, u can patch up the holes in the rear guards and have them re-sprayed, and the ones in the boot i believe still align with an oem wing so try that on before drilling any new holes.

uhh don't know which one you're talking about

I've taken mine off and it left 7 holes on each side quarter, I'll post pics if you don't believe me

Well... very interesting thread, as i did the whole process a few months ago :(

Lets see.. let me find some pics...

The only wing i could be bothered to put on after the make over.. as i was rushed for the auto salon.

LeftRear-1.jpg

A few years after the show... bit more modification... etc etc.. wing ripped.. and as you can see. mine wasn't bolted. siliconed on which i think was a much smarter move than what the previous owners of your cars did. Holes :S what a waste.

DSC05097.jpg

Then car repainted and now with OEM R34 GT-R wing.

DSC05921.jpg

Owgasm's black version of the OEM GTR R34 spoiler looks nice, is it carbon fibre? or just black?

R-SPEC get rid of the Nismo spoiler, I hate it. ;) . If I had that spoiler I'd take it off and put on the GTR on or leave it off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...