Jump to content
SAU Community

Recommended Posts

Gday guys, I have just finished fitting a set of tein coil overs into my R34 GTT. Went for a drive and noticed a knock from the rear.

I just went over all the nuts n bolts to make sure they are tight and everyting is.

Just wondering if anyone has had something like this before and knows what it could be??

Thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/
Share on other sites

Ok done a bit more reading.....

When I fit the new coil overs I didnt refit the metal plate that was between the strut and the body in the rear as the new ones are damper adjustable so didnt really want the adjustment screw being covered up by it!

Could that cause the knock?

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-3608935
Share on other sites

<br />Nah the boots empty. I guess ill just have to keep playin around with them until i find what it is!<br />
<br /><br /><br />

is the suspension brand new or 2nd hand?

when you jack the car up, can you move the rear wheels up and down easily? i had this problem, i could just move the wheels up and down on the shocker. i had to get it refilled

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-3609201
Share on other sites

They are 2nd hand....only done 10,000km tho supposedly! I put the metal plates back in the rear, (the ones that go between the strut and the body) and it hasnt really made any difference. Bugger.

Im hoping that the shocks arent stuffed in them already!

sorry forgot to mention daz, i checked for movement with the car raised and there is none.

thanks for your help so far guys

Edited by jase-r34
Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-3609504
Share on other sites

you said they were new..ha

well if theyre deff second hand then that knocking will most probably be your pillowtops. they are worn. i have used teins and my right rear and front knock over rough bumps. not much you can do really except replace the tops. when your in the back seat or boot jump up and down to work the suspension on whichever side, you should be able to hear the knock then.

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-3610243
Share on other sites

Thanks for that nismo, I was actually thinking about suggesting if anyone thought that might help, but thought i'd look like a total knob hahaha.

Ill give it a go and let you know what happens!

The thought also crossed my mind that the noise could be normal as i've never used coil overs in any of my cars before!

Cheers for all the help guys!

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-3612574
Share on other sites

Ok, jacker her up and gave the strut tops a good old spraying with WD40 and took it for a run....no difference.

Oh well looks like im not going to get out of it that easily! should have known hahahaha

Thanks for your suggestions tho guys!

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-3617798
Share on other sites

the centre nut on the top of the shock may not be tight enough, tighten it right down. There will be a way to hold the dhock body from rotating while you do (allen key or slotted for a spanner somewhere on the shock body

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-3618112
Share on other sites

  • 1 year later...

I am gaving the same issue with my 2000 Stagea.

Car was imported with Teins and is getting worse. Rears are really bad and giving me the S*its. Have taken to local suspension shop and they have no idea.

over speed bumps they are smooth, only over sharp bums they are knocking.

Will keep track of this topic lol

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-4801292
Share on other sites

my brand new D2 coil overs knock in the front the odd time if i hit a hard or deep bump, but for mine its a knock being caused by the shock 'topping out' on its recoil...sounds rough but i dont think its hurting anything

Link to comment
https://www.sau.com.au/forums/topic/203557-coil-overs/#findComment-4801492
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...