Jump to content
SAU Community

Recommended Posts

My Filtermag arrived today from the USA, probably not really worth posting about, but since I wasnt able to find one in Australia I figured I would anyway. The concept is that your oil filter cannot phyically filter out all of the metal shavings produced as part of engine operation. If it could, the filter would have to be so fine that Oil itself couldn't pass through. Instead, the fine iron particles are attracted to the the magnet and removed from the oil circulating through your engine. I tested it on a spare oil filters in the garage and damn it's a powerful mofo! once that b1tch is on it won't come off too easily!

Has anyone else tried them out? Comments?? etc?

cimg1542bh6.jpg

So this goes AROUND the outside of the line or something, still leaving the metal in there, just collecting enough of it together, that when you finally take it off, you have a ball bearing of metal ready to be sent through your engine? Or if you leave it on, you have a clog...

Is this correct?

Cause if it is, it sounds like fun :(

I'm guessing it would accumilate in the filter, then when u change filter take it off and turf the shrapnel with it, then put it over the new filter.

Good idea.

Haha well I bought it specifically for whilst running in my new motor, I also have a magnetic sump plug, the g/f's dad has one one of the plugs his Gen III which picks up alot of cr@p too.

Edited by MintR33

Sure mate, I got it from ebay off this guy: Ebay Member

And the product website is: www.filtermag.com

If I remember correctly the website has alot of pics of filter's cut in half... take them as you will, no doubt they only posted pics with the largest build up of fine iron, but in all honesty I can't see how it wouldn't work, since the dirty oil passes through the outside of the filter past the magnet before being pulled through the filter core. I've also heard that the A'PEXi UFO filters use a magnet aswell. The benefit of this one is that you can swap ot over to your new filter with every oil change.

not a bad idea on a new engine since everything is wearing in but i see it doing close to nothing on a engine that was already "run in".

If your engine was turning around metal that is able to be picked up by a magnetic, you have more things to worry about than oil filtration.

SnakOil my ace, ppl run magnetic sump plugs for the same reason. Here you have much more powerful rare earth magnets (i would assume) right where the oil is already turbulent and full 'o' eddys.

Check the site, theres something being picked up by the magnet thats gettn by the filter.

These are absolute gold, one of those "cant believe i didn't think about that" ideas thats cheap as a blowjob. CRD and some other shops incidentally have been running them on thier cars for a while.

Edited by GeeTR

GReddy also make an Oil Filter that has a magnet built in. I have been using these for quite a while, however as far as I'm aware they are being discontinued so this might be the next step for me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...