Jump to content
SAU Community

Recommended Posts

  • Replies 140
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 months later...

sorted out the rear brake disks - gong alloy hat with standard handbrake - prob end up with 330-343 rotor on the rear

front should be able to take a 343 or 350 mm rotor - this will depend on the internal clearance of the work meisters

  • 2 weeks later...

Enemie - you'll need to decide what rotor size you want to run then get an adapter made to suit.

Specialised Brake and Clutch in Penrith is hooking me up with the brackets and everything i need.

343mm seems to be the largest rotor the front caliper can handle without machining the the ends for rotor clearance - pad position is only a couple of mm above the rotor edge on the 355mm

Enemie - if you are really keen pm with the cars details and the rotor size you want, i'll see if i can get a bracket to match machined to suit your choices and car

  • 5 months later...

well turns out im running 2 piece 355mm rotors front and rear

rear calipers are being spaced wider to allow for a thicker rotor on the rear to bring it back to an easily obtainable non custom rotor

well turns out im running 2 piece 355mm rotors front and rear

rear calipers are being spaced wider to allow for a thicker rotor on the rear to bring it back to an easily obtainable non custom rotor

what thickness are the rotors?

can get this stuff tomorrow - basically letting them take the head on this one, im just doing to coating on the parts as they finish them and since this isnt a retail purchase i cant tell you any prices.

i was expecting the rears to be 343mm but when they arrived for me to coat i realised they were the same as the fronts

think i recall that the hard annodised alloy hats for the rear end are over $900 a pair

- obviously a single piece rotor could be used

  • 2 weeks later...
  • 2 weeks later...

yeah - but not sure when it will be finished lol

this is being done in spare time as a favour kind of thing - so its not getting a high priority

only thing left was the rear brackets and caliper spacers (to fit the rears over wider disks)

then get the calipers back for me to coat then back to them to check in case a rebuild is required.

  • 2 months later...

What are you guys paying (roughly) for adapters/dogbones to adapt the evo brembo's to skyline hubs?

Who has a good 355mm rotor/adapter combo they can share?

Cheers

Justin

Edited by XRATED

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What's on the front of their building?
    • Jax Tyres Smithfeild Ive gone there a few time, well for tyres. on my 3rd visit I spoke to the dude and told how i just got slugged for rotors, brakes ect. His reply was golden; have you read whats on the front of the building. Never forgot it.       before picture, good friend got all these goodies installed.  Well time to study, servicing, maintenance all before this weekend driving lesson.  
    • Hello, first of, I’ve looked at many threads on this code but none have helped me, if you know one that will help me feel free to post a link.   Now to my problem. Recently I was driving and noticed the check engine light came on. I went home and did the test to see what code it gave. I got the 21 code but everything seems fine with the car, no misfire, idle is good, acceleration is the same as when I bought it. I mean no signs of obvious failure. If no misfire is happening I can rule out the coil packs right? Which is about 98% of posts saying it is. If anyone has had this happen and found the issues let me know please. No other lights are on.   The car WAS due for an oil change. I since then changed it so idk if that triggers code 21. Either way it hasn’t turned off.
    • Your both right, it may hold a bit longer then.  Soon I need to change the synchros, should I fit the billet plate while I'm at it? Or just a waste of money?
    • Some of the east coast US Stagea got together this past weekend at Lime Rock Park in CT for Grid Life Circuit Legends. This is probably my favorite pic of the shoot with @Morgan.Mundahl on IG. Hope we get more stags out next year! i think I spotted 5 other than my own at the event. 
×
×
  • Create New...