Jump to content
SAU Community

Recommended Posts

gees if you went too all that trouble to rebuild your motor with forged pistions why did you not just add stonger rods it would have cost the same in labour and then you could have forgot about it and it would be good for 370kw or 500hp.

I would hate to guess, so depending on variables, generally speaking it should be fine, but if its a 32gtr replacing old items with new makes sense. I take it you got upgrade turbos to handle 300kw? And seriously think of getting a N1 oil pump at this powerlevel for all day every day.

yeh they have ARP rod bolts.....I bought the car with the motor rebuilt if I did it I would have put steel rods in it, Also has an N1 oil pump and GT2860R turbos has all other components and support mods to handle 300kw just wanted to make sure the rods will be alright cause my mechanic was a bit sceptial bout it.

thanks for the info guys, also another quick question would the stock AFM's be ok for 300kw? Ive been told a cheap way around it is to you 2 rb25det ones??? Also I know this topic may have been covered aswell with a good pump and reg would the stock GTR injectors handle 300kw? I have a set of 660 nismos but im sure the $750 could be spent elsewhere if they went necassary

i wouldnt push my luck with the injectors and fuel pump when asking for 300..just generally not a smart move.

leave your AFM's as stock RB26DETT ones they will handle that fine (saving of about $600 from Z32's)

As it says guys I have had my motor rebuilt with forgies but it still has the standard rods they have just been shot peened and crack tested or something would they hand 300kw all day everyday? cheers

no problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
×
×
  • Create New...