Jump to content
SAU Community

Recommended Posts

Had an idea for a cruise the other day when I took the back road to Yarra Glen. This looks like an oppertunity to have a great drive through a 80kmph windy road with bush sourroundings which open up into an awesome view over the yarra valley.

The meet point: The Macdonalds carpark on the corner of plenty road and University Drive in Mill Park/ Morang South. There is a big shell service station at this meet point and a 5-6 car car wash too for those who need it.

Meet Time: 3pm, Sat. 16th Feb. We will be leaving at 4pm

Approx Cruice time: 1.5 - 2 hours one way

From the meet point we will drive down Plenty road to the ring road and continue towards Greensborough and through Eltham.

After we pass the suburbs, and as we pass through Kangaroo Ground the road opens out into an outback 80kmph zone through the bush with heaps of turns and hills. We will stop at Yarra Glen for some refreshments however I suggest that you have a tank full of fuel when we start as the petrol price here will be far more expensive. After a break at Yarra Glen, we face a 100kmph zone with open, flat areas (with the odd 90 degree corner) until we hit Healesville. Anyone who wants to stop at the Safeway there can pick up some munchies and a drink for the short little hop to Maroondah Dam. We will be stopping here for a while for a long break/ photos etc. There is a huge picnic area (with BBQs) and carpark at the dam if they're needed.

If at that stage anyone has any suggestions on where to go next, i'll be open to ideas. I know the road just past the dam is pretty cool to those who want to do some serious 80kmph hill climbing.

If people could let me know if they're interested in coming, it would be great.

If any more info is needed, just ask.

post-45933-1202174758_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/204583-cruise-on-16th-feb-whos-up-for-it/
Share on other sites

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Bah, to many cops and slow moving cars on that road to have a fun drive on the weekend, and there is only 1 really "safe" overtaking zone in the whole stretch from Kangaroo Ground to Yarra Glen, and the cops usually place a speed camera right in the middle of it.

btw kudos to you 4 organising this but one point... you have just told any cop browsing SAU where to find us. pm ppl the meet points if they ask and hand out details on the day. :stupid:

You wouldn't be thinking of doing anything naughty or driving an unsafe vehicle on the cruse... ...would you???...

I recon that if people behave themselves and stick to the road rules and don't make fools of themselves we will get no more than 'double take' looks from the police. It's not the sort of road to be pulling handbreak tuns on (however fun it might seem), it's just a nice ride through some good ol' twists and turns.

This is my first idea for a cruise, and i'd be more into getting to know the community of SAU rather than organising a 'who can get there the fastest' event.

If anyone wants to know about the park I have found this link:

http://www.parkweb.vic.gov.au/1park_display.cfm

I haven't planned on going as far as the Black Spur, but if anyone is up for it I'm sure we can just play it by ear and head up that way on the day.

What you could do is contact the police and say iam orgainsing a cruise tell them where we start and finsh let them know about the meet points, They might just come to the meet up and see how people are behaveing. Its just a serctstion.

Just to let you guys know, there is going to be an AE86/RWD corolla cruise in that area on that day there as well.

Put me down as a maybe. Not sure if I'm gonna go with the ae86 guys or skyline group yet. :no:

Looks like the numbers for the cruise are slowly stacking up.

Just to everyone is aware, we're not stopping in Eltham as on the map. I had to add a 'stop' into whereis.com to get the trail to lead through there. The only real scheduled stop will be in Yarra Glen. I have attached a photo pf the major landmark at Yarra Glen - The Grand Hotel. I think that'll be the best place to find a park and meet.

I have also attached a photo of the vew from the road about 8kms onto the Yarra Valley. Sorry about the crappy quality but is the best one I could find.

The most difficult part in keeping together will be between Greensborough and Eltham. After this it's basically just a 'straight' road to the first meet point. After that, we just need to follow the signs to Healesville.

post-45933-1202423226_thumb.jpg

post-45933-1202423244_thumb.jpg

Hey,

Sounds good, there are 3 of us interested in coming but we'll have to meet you guys at the stop in yarra glen, as one of us finishes work at 5 on Sat.

What time are you planning on stopping at Yarra Glen and for how long?

cheers

Edited by evse82
Hey,

Sounds good, there are 3 of us interested in coming but we'll have to meet you guys at the stop in yarra glen, as one of us finishes work at 5 on Sat.

What time are you planning on stopping at Yarra Glen and for how long?

cheers

If we leave South Morang at 4, we should be getting close to Yarra Glen at about 4:45 or so. If the cruise numbers are up we might stop there for about an hour or so and grab a drink at the Grand. If you're coming from a while away, you might miss us.

Is there a possibility that your friend can finish work a little earlier? Chances are we will be heading back in the same direction too so if we're not at Yarra Glen, you can meet up with us at Maroondah Dam and head back with us.




  • Similar Content

  • Latest Posts

    • Mixing things up - installed some leather recaros to match the leather seat covered rear seats. Interior looks pretty schmick now except for some slight wear on the steering wheel which I will monitor and address if it becomes worse or actually noticeable!  
    • Didnt realise RB's had more then 1 head.
    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
×
×
  • Create New...